3HE00042AA Alcatel-Lucent SFP-LR-2/L-4.1 Optical Module
Out of stock
3HE00042AA Overview
Alcatel-Lucent SFP-LR-2/L-4.1 Optical Module for 1-port OC-12/STM-4 SONET/SDH, SFP LC, 1550nm 80km
$0
Out of stock
3HE00042AA Technical Specifications
Alcatel-Lucent SFP-LR-2/L-4.1 Optical Module
Form Factor: SFP
Data Rate: 622Mbps
Wavelength: 1550nm
Connector: LC Duplex
Cable Type: SMF
Reach Distance: 80KM
Operating Temperature Range: 0 ºC to 70ºC
Digital Optical Monitoring (DOM): Supported
Applications: OC12 LR2
Related products
-
Cisco Transceivers
SFP-OC3-MM, Cisco OC-3/STM-1 Pluggable Short-Reach Multimode
SFP-OC3-MM Overview
Cisco OC-3/STM-1 1310-nm Wavelength Short-reach 2KM MMF Original Transceiver Module.Cisco Transceiver Module- SFP – 1310 nm – OC-3/ STM-1 SFP-OC3-MM Standard Interface Converter (SFP) for packet-over-SONET/SDH optical networking ATM applications are hot-swappable optical interfaces that plug into a variety of ports on Cisco router interfaces.
SKU: SFP-OC3-MM -
Cisco Transceivers
SFP-OC48-IR1, Cisco OC-48/STM-16 Intermediate-Reach SFP Module
SFP-OC48-IR1 Overview
SFP-OC48-IR1 is a Cisco compatible OC-48 SFP Optical Transceiver and is factory preprogrammed with all the necessary configuration data for seamless network integration.Cisco ® SFP optics for POS and ATM applications plug into a variety of SFP-based POS, TDM and ATM interfaces on Cisco router products. This line of SFP optics supports the following three data rates at various reaches: OC-3/STM-1 (155 Mbps), OC-12/STM-4 (622 Mbps), and OC-48/STM-16 (2,488 Gbps).The SFPs are compatible with the SONET/SDH and ATM standards, and support the digital diagnostic functions specified in the SFF-8742 Multi-Source Agreement (MSA) and the extended operating temperature range from 23 to185°F (-5 to 85°C).
SKU: SFP-OC48-IR1 -
Cisco Transceivers
GLC-BX-D, Cisco 1000BASE-BX10 Downstream SFP Transceiver Module
GLC-BX-D Overview
The industry-standard Cisco® Small Form-Factor Pluggable (SFP) Gigabit Interface Converter links your switches and routers to the network. The hot-swappable input/output device plugs into a Gigabit Ethernet port or slot. Optical and copper models can be used on a wide variety of Cisco products and intermixed in combinations of 1000BASE-T, 1000BASE-SX, 1000BASE-LX/LH, 1000BASE-EX, 1000BASE-ZX, or 1000BASE-BX10-D/U on a port-by-port basis. Is 1000BASE-BX10-D downstream bidirectional single fiber; with DOM.
SKU: GLC-BX-D -
Cisco Transceivers
GLC-LH-SMD= Cisco 1000BASE-LX/LH SFP Transceiver Module
GLC-LH-SMD= Overview
GLC-LH-SMD= is the 1000BASE-LX/LH SFP for Both Multimode and Single-Mode Fibers. The 1000BASE-LX/LH SFP, compatible with the IEEE 802.3z 1000BASE-LX standard, operates on standard single-mode fiber-optic link spans of up to 10 km and up to 550 m on any multimode fibers.
SKU: GLC-LH-SMD=
