6800-SFP-SX Alcatel-Lucent 1000Base-SX MMF SFP 850nm 550m
Out of stock
6800-SFP-SX Overview
Alcatel-Lucent 1000Base-SX MMF SFP 850nm 550m
$0
Out of stock
6800-SFP-SX Technical Specifications
Alcatel-Lucent 1000Base-SX MMF SFP 850nm 550m
Form Factor: SFP
Data Rate: 1Gb/s
Wavelength: 850nm
Connector: LC Duplex
Cable Type: MMF
Reach Distance: 550M
Operating Temperature Range: 0 ºC to 70 ºC
Digital Optical Monitoring (DOM): Supported
Applications: 1000Base-SX
Related products
-
-
Cisco Transceivers
GLC-FE-100FX, Cisco 100B-FX SFP Module LC Multi-Mode
GLC-FE-100FX Overview
The Cisco 100BASE-FX Small Form-factor Pluggable (SFP) is a hot-swappable input/output device that plugs into a Fast Ethernet port or slot, linking the port with the network. It operates on ordinary multimode fiber-optic (MMF) link spans up to 2 kilometers long. Supports the Cisco quality ID feature that enables the switch or router to identify whether or not the SFP is a Cisco qualified SFP
SKU: GLC-FE-100FX -
Cisco Transceivers
GLC-BX-D, Cisco 1000BASE-BX10 Downstream SFP Transceiver Module
GLC-BX-D Overview
The industry-standard Cisco® Small Form-Factor Pluggable (SFP) Gigabit Interface Converter links your switches and routers to the network. The hot-swappable input/output device plugs into a Gigabit Ethernet port or slot. Optical and copper models can be used on a wide variety of Cisco products and intermixed in combinations of 1000BASE-T, 1000BASE-SX, 1000BASE-LX/LH, 1000BASE-EX, 1000BASE-ZX, or 1000BASE-BX10-D/U on a port-by-port basis. Is 1000BASE-BX10-D downstream bidirectional single fiber; with DOM.
SKU: GLC-BX-D -
Cisco Transceivers
GLC-ZX-SMD Cisco LC to PC Single-Mode SFP Transceiver 1 GBPS
GLC-ZX-SMD Overview
Cisco GLC-ZX-SMD is a 1000BASE-ZX SFP for Long-Reach Single-Mode Fiber. The 1000BASE-ZX SFP operates on standard single-mode fiber-optic link spans of up to approximately 70 km in length. The SFP provides an optical link budget of 21 dB, but the precise link span length depends on multiple factors such as fiber quality, number of splices, and connectors.When shorter distances of single-mode fiber (SMF) are used, it might be necessary to insert an inline optical attenuator in the link to avoid overloading the receiver. A 10-dB inline optical attenuator should be inserted between the fiber-optic cable plant and the receiving port on the SFP at each end of the link whenever the fiber-optic cable span loss is less than 8 dB.
SKU: GLC-ZX-SMD
