DWDM-SFP10G3977 Cisco 10GBASE-DWDM 1539.77 Nm SFP+
Out of stock
DWDM-SFP10G3977 Overview
Cisco 10GBASE-DWDM 1539.77 Nm SFP+
DWDM-SFP10G3977 Technical Specifications
Cisco 10GBASE-DWDM 1539.77 Nm SFP+
Manufacturer: Cisco Systems, Inc
Manufacturer Part Number: DWDM-SFP10G3977-RF
Brand Name: Cisco
Product Name: 10GBASE-DWDM 1539.77 nm SFP+ (100-GHz ITU grid)
Product Condition: New
Product Type: SFP+
Related products
-
-
Cisco Transceivers
WS-G5487= Cisco 1000Base-ZX extended reach GBIC
WS-G5487= Overview
The Cisco 1000BASE-T Gigabit Interface Converter (GBIC) is an ideal solution for Catalyst ® 6500, 4000, 3550, 2950, 3500 XL and 2900 XL Series switch customers, providing full duplex Gigabit Ethernet connectivity to high-end workstations and between wiring closets over existing copper network infrastructures. This GBIC technology leverages the industry’s flexible, standards-based 1000BASE-X design, allowing for a simple and low-cost migration path to Gigabit Ethernet. There are two key product applications for the Cisco 1000BASE-T GBIC: connectivity to high-end workstations and distribution and wiring closet interconnectivity.
SKU: WS-G5487= -
Cisco Transceivers
SFP-10G-LR= Cisco SFP+ Transceiver Module – 10GBASE-LR – LC/P
SFP-10G-LR= Overview
Cisco SFP-10G-LR module is the single-mode 10G fiber optical transceiver, the Cisco 10G Base-LR Module supports a link length of 10 kilometers on standard single-mode fiber (SMF, G.652) and SFP-10G-LR SFP Plus optical transceiver offers up to 10Km link length on standard single-mode fiber.
SKU: SFP-10G-LR= -
Cisco Transceivers
GLC-ZX-SMD Cisco LC to PC Single-Mode SFP Transceiver 1 GBPS
GLC-ZX-SMD Overview
Cisco GLC-ZX-SMD is a 1000BASE-ZX SFP for Long-Reach Single-Mode Fiber. The 1000BASE-ZX SFP operates on standard single-mode fiber-optic link spans of up to approximately 70 km in length. The SFP provides an optical link budget of 21 dB, but the precise link span length depends on multiple factors such as fiber quality, number of splices, and connectors.When shorter distances of single-mode fiber (SMF) are used, it might be necessary to insert an inline optical attenuator in the link to avoid overloading the receiver. A 10-dB inline optical attenuator should be inserted between the fiber-optic cable plant and the receiving port on the SFP at each end of the link whenever the fiber-optic cable span loss is less than 8 dB.
SKU: GLC-ZX-SMD
