CDE2-SFP-5WCX Cisco SFP+ 10GE Passive Twinax CU Harness CX1 5m
Out of stock
CDE2-SFP-5WCX Overview
Cisco SFP+ 10GE Passive Twinax CU Harness CX1 5m
CDE2-SFP-5WCX Technical Specifications
Cisco SFP+ 10GE Passive Twinax CU Harness CX1 5m
Connectivity
Connectivity Technology: Twinaxial
Connector: SFP+
Network Cable Type: Direct attach cable
General
Length: 16.4ft
Returns Policy
Due to manufacturer restrictions, all sales on this item are final.
Shipping Weight
1 lbs
UNSPSC
26121600
Warranty – Labor
Call for Warranty
Related products
-
Cisco Transceivers
GLC-SX-MMD= Cisco 1000BASE-SX SFP MMF Transceiver Module
GLC-SX-MMD= Overview
The 1000BASE-SX SFP, compatible with the IEEE 802.3z 1000BASE-SX standard, operates on legacy 50 μm multimode fiber links up to 550 m and on 62.5 μm Fiber Distributed Data Interface (FDDI)-grade multimode fibers up to 220 m. It can support up to 1km over laser-optimized 50 μm multimode fiber cable.
SKU: GLC-SX-MMD= -
Cisco Transceivers
SFP-10G-ZR, Cisco 10GBASE-ZR SFP10G Module for SMF
SFP-10G-ZR Overview
The Cisco is a multi-rate 10GBASE-ZR, 10GBASE-ZW, and OTU2/OTU2e module. It supports link lengths of up to about 80 kilometers on standard Single-Mode Fiber (SMF, G.652). This interface is not specified as part of the 10 Gigabit Ethernet standard and is instead built according to Cisco specifications.
SKU: SFP-10G-ZR -
Cisco Transceivers
GLC-LH-SM= Cisco 1000BASE-LX/LH SFP GBIC Transceiver
GLC-LH-SM= Overview
Cisco 1000BASE-LX/LH SFP for Both Multimode and Single-Mode Fibers. The 1000BASE-LX/LH SFP, compatible with the IEEE 802.3z 1000BASE-LX standard, operates on standard single-mode fiber-optic link spans of up to 10 km and up to 550 m on any multimode fibers. When used over legacy multimode fiber type, the transmitter should be coupled through a mode conditioning patch cable.
SKU: GLC-LH-SM= -
Cisco Transceivers
GLC-ZX-SMD Cisco LC to PC Single-Mode SFP Transceiver 1 GBPS
GLC-ZX-SMD Overview
Cisco GLC-ZX-SMD is a 1000BASE-ZX SFP for Long-Reach Single-Mode Fiber. The 1000BASE-ZX SFP operates on standard single-mode fiber-optic link spans of up to approximately 70 km in length. The SFP provides an optical link budget of 21 dB, but the precise link span length depends on multiple factors such as fiber quality, number of splices, and connectors.When shorter distances of single-mode fiber (SMF) are used, it might be necessary to insert an inline optical attenuator in the link to avoid overloading the receiver. A 10-dB inline optical attenuator should be inserted between the fiber-optic cable plant and the receiving port on the SFP at each end of the link whenever the fiber-optic cable span loss is less than 8 dB.
SKU: GLC-ZX-SMD
