DWDM-SFP10G-32.68= Cisco Systems 10GBASE-DWDM 1532.68
Out of stock
DWDM-SFP10G-32.68= Overview
Cisco Systems 10GBASE-DWDM 1532.68
DWDM-SFP10G-32.68= Technical Specifications
Cisco Systems 10GBASE-DWDM 1532.68
Manufacturer Part# DWDM-SFP10G-32.68=
Condition: Factory New
Product Type SFP+
Ethernet Technology 10 Gigabit Ethernet
Media Type Supported Optical Fiber
Network Technology 10GBase-DWDM
Environmentally Friendly Yes
Environmental Certification RoHS
Fiber Mode Supported Single-mode
Total Number of Ports 1
Height 0.3″
Width 0.5″
Depth 2.2″
Connector Type LC/PC
Compatibility MSA Compliant
Form Factor Hot-swappable
Interfaces / Ports Details 1 x LC/PC Duplex 10GBase-DWDM Network
Limited Warranty 90 Day
Related products
-
Cisco Transceivers
GLC-SX-MM= Cisco 1000 Base-SX SFP mini-GBIC Transceiver
GLC-SX-MM= Overview
The 1000BASE-SX SFP, compatible with the IEEE 802.3z 1000BASE-SX standard, operates on legacy 50 μm multimode fiber links up to 550 m and on 62.5 μm Fiber Distributed Data Interface (FDDI)-grade multimode fibers up to 220 m. It can support up to 1km over laser-optimized 50 μm multimode fiber cable.
SKU: GLC-SX-MM= -
Cisco Transceivers
GLC-SX-MM-RGD= Cisco Rugged SFP (Mini-GBIC) Transceiver Module
GLC-SX-MM-RGD= Overview
The industry-standard Cisco Rugged SFP (Mini-GBIC) Transceiver Module is a hot-swappable input/output device that plugs into a Gigabit Ethernet port or slot, linking the port with the network. SFP can be used and interchanged on a wide variety of Cisco products.
SKU: GLC-SX-MM-RGD= -
Cisco Transceivers
GLC-ZX-SMD Cisco LC to PC Single-Mode SFP Transceiver 1 GBPS
GLC-ZX-SMD Overview
Cisco GLC-ZX-SMD is a 1000BASE-ZX SFP for Long-Reach Single-Mode Fiber. The 1000BASE-ZX SFP operates on standard single-mode fiber-optic link spans of up to approximately 70 km in length. The SFP provides an optical link budget of 21 dB, but the precise link span length depends on multiple factors such as fiber quality, number of splices, and connectors.When shorter distances of single-mode fiber (SMF) are used, it might be necessary to insert an inline optical attenuator in the link to avoid overloading the receiver. A 10-dB inline optical attenuator should be inserted between the fiber-optic cable plant and the receiving port on the SFP at each end of the link whenever the fiber-optic cable span loss is less than 8 dB.
SKU: GLC-ZX-SMD -
Cisco Transceivers
SFP-10G-ZR, Cisco 10GBASE-ZR SFP10G Module for SMF
SFP-10G-ZR Overview
The Cisco is a multi-rate 10GBASE-ZR, 10GBASE-ZW, and OTU2/OTU2e module. It supports link lengths of up to about 80 kilometers on standard Single-Mode Fiber (SMF, G.652). This interface is not specified as part of the 10 Gigabit Ethernet standard and is instead built according to Cisco specifications.
SKU: SFP-10G-ZR
