Juniper Expansion Modules
Showing 226–250 of 325 resultsSorted by popularity
-
Juniper Expansion Modules
JNP-MIC1 Juniper 12x100G 12x40G 48x10G Universal
JNP-MIC1 Overview
The Juniper Networks Multi-Rate Ethernet Modular Interface Card (MIC) has twelve 100-Gigabit Ethernet ports that support quad small form-factor pluggable (QSFP28) transceivers. Each port can be configured as a 100-Gigabit Ethernet port, as a 40-Gigabit Ethernet port, or as four 10-Gigabit Ethernet ports (by using a breakout cable)
SKU: JNP-MIC1 -
Juniper Expansion Modules
BT8A78CFP1G Juniper Networks BTI Interface Card expansion module
BT8A78CFP1G Overview
BTI Interface Cards (BICs) are modules that hold pluggable transceivers. The transceivers are plugged into the BICs, which in turn are inserted into the UFMs. A BIC can be installed into a UFM3 or a UFM4.
SKU: BT8A78CFP1G -
-
Juniper Expansion Modules
MPC3E-3D-NG-Q Juniper Networks expansion module
MPC3E-3D-NG-Q Overview
The NG-MPC2 uses the latest programmable Junos Trio chipset, which features an upgraded CPU and increased memory to provide powerful routing, switching, and services capabilities, including line-rate forwarding, hierarchical quality of service (QoS), integrated video quality assurance, flow monitoring, load balancing, and Network Address Translation (NAT). Both modules support a complete set of Juniper Networks Junos operating system-based Layer 2, Layer 2.5, and Layer 3 features, and both host two Modular Interface Cards (MICs) for flexible high-density Ethernet and time-division multiplexing (TDM) network connectivity.
SKU: MPC3E-3D-NG-Q -
Juniper Expansion Modules
BT8A78UFM6-I02 Juniper 40x10GbE+4x100GbE Forwarding Module
BT8A78UFM6-I02 Overview
The Juniper Networks Universal Forwarding Module contains 10 client ports and a 400G Coherent MSA receiver. It is designed for use with the BTI7800 series packet optical transport platforms.
SKU: BT8A78UFM6-I02 -
Juniper Expansion Modules
MIC3-100G-DWDM Juniper Networks expansion module
MIC3-100G-DWDM Overview
The Juniper Networks Expansion Module provides a single 100-Gigabit Ethernet interface port with OTU4 (v) framing. Its CFP2-ACO DWDM optical transceiver supports DP-QPSK modulation with coherent reception. It employs Gigabit Ethernet local loopback for fast connectivity. This module features diagnostic tools like Optical Channel Data Unit (ODU) open connection error and lock maintenance signal, line loopback and local loopback for hassle-free maintenance.
SKU: MIC3-100G-DWDM -
Juniper Expansion Modules
BT8A78CAS1 Juniper GigaLight SMF Elite MTP (Angled) LC/UPC
BT8A78CAS1 Overview
The Juniper GigaLight Single Mode 1 x 8F MTP Fiber Optic Mini Cassette connects to the QSFP+ transceiver through an MTP connector and provides access to individual 10 Gb/s channels through four LC/UPC ports.
SKU: BT8A78CAS1 -
Juniper Expansion Modules
SRX5K-SPC3 Juniper Networks SRX 5000 Services processing card
SRX5K-SPC3 Overview
The Services Processing Card (SPC) contains two Services Processing Units (SPUs) with 128GB of memory per SPU, that provide the processing power to run integrated services such as firewall, IPsec, and IDP. All traffic traversing the services gateway is passed to an SPU to have services processing applied to it. Traffic is intelligently distributed by I/O cards (IOCs) to SPUs for services processing.
SKU: SRX5K-SPC3 -
-
Juniper Expansion Modules
MPC7E-MRATE-RTU Juniper 12xQSFP+/QSFP28 Multirate Port Line Card
MPC7E-MRATE-RTU Overview
12xQSFP+/QSFP28 multirate port line card, full scale L2/L2.5 features, reduced scale L3,up to 2M routes in FIB,up to 6M routes in RIB, and up to 32 L3VPN instances per card. 4 ports out of 12 support QSFP28. Licensed for 6 ports (2xQSFP28).
SKU: MPC7E-MRATE-RTU -
Juniper Expansion Modules
QFX10008-SF Juniper QFX Series QFX10008 Switch Fabric Card
QFX10008-SF Overview
The Juniper Networks QFX10000 line of modular Ethernet switches delivers up to 96 Tbps of system throughput, scalable to over 200 Tbps in the future, to meet the rapid and ongoing traffic growth in the data center. Industry-leading scale and density on the QFX10000 modular switches redefine per-slot economics, enabling customers to do more with less while simplifying network design and reducing OpEx. Based on purpose-built Q5 ASICs, the QFX10000 line delivers unparalleled intelligence and analytics, providing deeper insights into application performance.
SKU: QFX10008-SF -
Juniper Expansion Modules
JXM-1V92-S Juniper 1 port v.92 Mini Physical Interface Module
JXM-1V92-S Overview
The optional Juniper Networks single-port V.92 Mini Physical Interface Module (Mini-PIM) for the SSG 20 platform complements the five on-board 10/100 Ethernet interfaces with expanded WAN connectivity.
SKU: JXM-1V92-S -
Juniper Expansion Modules
PE-2EIA530 Juniper Networks EIA-530 Serial Physical Interface Card
PE-2EIA530 Overview
The EIA-530 Serial Physical Interface Card (PIC) provides a cost-effective solution for enterprise WANs and ISPs who need to establish connectivity between Juniper Networks M-series routers and network devices with EIA-530 interfaces. Juniper Networks also offers conversion cables that work with the EIA-530 Serial PIC to enable X.21 and V.35 serial interfaces. The EIA-530 PIC is an excellent choice for mission-critical applications that require dependable serial interfaces. Offering hardware flexibility and adaptability for various applications, the EIA-530 Serial PIC provides connectivity to a wide range of synchronous equipment at data transfer rates of up to 16Mbps.
SKU: PE-2EIA530 -
Juniper Expansion Modules
FEB-M10I-M7I-S Juniper Compact Forwarding Engine Board control
FEB-M10I-M7I-S Overview
The FEB is a control board for the M5 and M10 routers. The FEB communicates with the Routing Engine using a dedicated 100-Mbps link that transfers routing table data from the Routing Engine to the forwarding table in the Internet Processor II application-specific integrated circuit (ASIC). The link is also used to transfer routing link-state updates and other packets destined for the router from the FEB to the Routing Engine.
SKU: FEB-M10I-M7I-S -
Juniper Expansion Modules
PB-MS-100-1 Juniper Networks Multiservices PIC Type 1 module
PB-MS-100-1 Overview
The Juniper Networks Multiservices PICs (MS-PICs) are modules that supply hardware acceleration for an array of packet processing-intensive services. Today these services include stateful firewall, Network Address Translation (NAT), IPSec, anomaly detection, L2TP LNS, J-Flow accounting, Link Services, and tunnel services
SKU: PB-MS-100-1 -
Juniper Expansion Modules
NS-5000-8G2-G4-TX Juniper Secure Port Module expansion module
NS-5000-8G2-G4-TX Overview
Juniper Networks further expands overall system functionality and performance by introducing Secure Port Modules (SPMs). The SPMs take advantage of Juniper’s fourth generation security ASIC to deliver advanced functionality at multi-gigabit rates. These SPM modules deliver the Juniper heritage of high-performance security while expanding capabilities and capacities for customers.
SKU: NS-5000-8G2-G4-TX -
Juniper Expansion Modules
PE-2OC3-SON-SFP Juniper Physical Interface Card expansion module
PE-2OC3-SON-SFP Overview
The Juniper Networks Multi-Rate SONET/SDH PICs product family is a suite of SONET/SDH interface modules that supports rich packet processing, multiple IP services, and uncompromising performance while offering market-leading port density and flexibility. These modules provide IP-over-SONET/SDH optical connectivity to backbone and access circuits.
SKU: PE-2OC3-SON-SFP -
Juniper Expansion Modules
EX8200-48F Juniper Networks EX 8200 Ethernet Line Card
EX8200-48F Overview
The Juniper Networks EX8200 line of Ethernet switches offer powerful, modular platforms that deliver the performance, scalability, and carrier-class reliability required for today’s high-density enterprise data center and campus aggregation and core environments, as well as high-performance service provider interconnects.
SKU: EX8200-48F -
Juniper Expansion Modules
EX8200-48T Juniper Networks EX 8200 Ethernet Line
EX8200-48T Overview
The Juniper Networks EX8200 line of Ethernet switches offer powerful, modular platforms that deliver the performance, scalability, and carrier-class reliability required for today’s high-density enterprise data center and campus aggregation and core environments, as well as high-performance service provider interconnects.
SKU: EX8200-48T -
Juniper Expansion Modules
EX8200-8XS Juniper Networks expansion module 8 ports
EX8200-8XS Overview
The Juniper Networks EX8200 line of Ethernet switches offer powerful, modular platforms that deliver the performance, scalability, and carrier-class reliability required for today’s high-density enterprise data center and campus aggregation and core environments, as well as high-performance service provider interconnects.
SKU: EX8200-8XS -
Juniper Expansion Modules
PB-1OC48-SON-B-SFP Juniper Networks expansion module
PB-1OC48-SON-B-SFP Overview
The Juniper Networks Multi-Rate SONET/SDH PICs product family is a suite of SONET/SDH interface modules that supports rich packet processing, multiple IP services, and uncompromising performance while offering market-leading port density and flexibility. These modules provide IP-over-SONET/SDH optical connectivity to backbone and access circuits.
SKU: PB-1OC48-SON-B-SFP -
Juniper Expansion Modules
PB-4DS3-E3-IQE-BNC Juniper DS3 IQ-E Physical Interface Card
PB-4DS3-E3-IQE-BNC Overview
The Juniper Networks Enhanced IQ PIC Module is highly sophisticated hardware and software module that implement the next generation of class of service, class-based traffic management and high-level channelization capabilities.
SKU: PB-4DS3-E3-IQE-BNC -
Juniper Expansion Modules
HCM-M10I-S Juniper High-Availability Manager control processor
HCM-M10I-S Overview
The High-Availability Chassis Manager (HCM) works with its companion Routing Engine to provide control and monitoring functions for router components. The HCM also displays alarm status and takes PICs online and offline.
SKU: HCM-M10I-S
