Expansion Modules
Showing 1126–1150 of 1393 resultsSorted by popularity
-
Juniper Expansion Modules
DPCE-R-2XGE-XFP Juniper Dense Port Concentrator
DPCE-R-2XGE-XFP Overview
Dense Port Concentrator in addition to the Layer 2 switching and MPLS features offered on DPCE-R card that can provide full suit of layer routing protocols and packet processing capabilities. This Juniper Networks Dense Port Concentrator is in refurbished condition and is fully guaranteed by our 90-day warranty. Please feel free to contact us regarding our inventory of refurbished Juniper Networks networking equipment, or if you have any additional questions regarding this Dense Port Concentrator.
SKU: DPCE-R-2XGE-XFP -
Juniper Expansion Modules
EX9200-2C-8XS Juniper Networks expansion module
EX9200-2C-8XS Overview
The line card in EX9200 switch provides packet forwarding services. It is field-replaceable units (FRUs) that can be installed in the line card slots on the front of the switch chassis. The line card is hot-insertable and hot-removable: You can remove and replace them without powering off the switch or disrupting switch functions.
SKU: EX9200-2C-8XS -
Juniper Expansion Modules
DPCE-X-20GE-2XGE Juniper 22-Port Multi-Rate Enhanced Ethernet
DPCE-X-20GE-2XGE Overview
22-Port Multi-Rate Enhanced Ethernet Services DPC provide multiple physical interfaces and Packet Forwarding Engines (PFE) on a single board that installs in a slot in the Juniper Networks MX Series Ethernet Services Router. A DPC receives incoming packets from the network and sends outgoing packets to the network.
SKU: DPCE-X-20GE-2XGE -
Juniper Expansion Modules
SRX-GP-1DS3-E3 Juniper Networks SRX Series Clear Channel GPIM
SRX-GP-1DS3-E3 Overview
The Clear Channel DS3/E3 GPIM functions as a clear channel interface that can support DS3 (T3) or E3 line rates of 44.796 or 34.368 Mbps, respectively. The DS3/E3 interface is a popular high-bandwidth WAN interface for large enterprise branch locations that enables high-quality voice, video, and data applications with reduced latency. The clear channel implementation provides such features as subrate and scrambling options used by major DSU vendors. The interface also supports loopback, bit error rate test (BERT), and far-end alarm and control (FEAC) diagnostic capabilities. It supports frame relay, Point-to-Point Protocol (PPP), and High-Speed Data Link Control (HDLC) serial encapsulation protocols.
SKU: SRX-GP-1DS3-E3 -
Juniper Expansion Modules
TCX1000-2D8CMD Juniper TCX1000 2D 8 Channel MUX/Demux
TCX1000-2D8CMD Overview
The is a standalone C-Band two-degree eight channel colorless passive multiplexer/ demultiplexer. It is a rack-mounted module that is installed alongside the TCX1000-RDM20. Each module combines the signals at eight channel input ports (C0 to C7IN ports) and broadcasts the multiplexed signals out of two Line-side direction ports (L0 OUT and L1 OUT) ports. The module also combines the signals at the two Line-side input ports (L0 IN and L1 IN ports) and broadcasts the demultiplexed signals out of eight channel output ports (C0 to C7OUT ports).
SKU: TCX1000-2D8CMD -
Juniper Expansion Modules
JNP10003-RE1-R Juniper JNP10003 Routing Engine Redundant
JNP10003-RE1-R Overview
This Juniper Networks Routing Engine and Control Board redundant router plug-in module is designed for use with the Juniper Networks MX10003 Universal Routing Platform. The Juniper Networks MX10003 is an Ethernet-optimized edge router that provides both switching and carrier-class Ethernet routing. Each router provides full duplex, high-density Ethernet interfaces and high-capacity switching throughput
SKU: JNP10003-RE1-R -
-
-
-
-
-
Juniper Expansion Modules
SRX5K-IOC4-MRAT Juniper Networks expansion module
SRX5K-IOC4-MRAT Overview
These I/O cards (IOCs) provide additional physical network connections to the services gateway. Their primary function is to deliver data packets arriving on the physical ports to the services processing cards and to forward data packets out the physical ports after services processing.
SKU: SRX5K-IOC4-MRAT
