Expansion Modules
Showing 1151–1175 of 1393 resultsSorted by popularity
-
Firewalls and Security Appliances, Juniper Expansion Modules
MX-SPC3 Juniper Networks Services Processing Card control processor
Firewalls and Security Appliances, Juniper Expansion ModulesMX-SPC3 Juniper Networks Services Processing Card control processor
MX-SPC3 Overview
Juniper Networks Services Processing Cards (SPCs) provide the processing power to run integrated services such as firewall, IPsec and IDP. All traffic traversing the services gateway is passed to an SPC to have services processing applied to it.
SKU: MX-SPC3 -
Juniper Expansion Modules
SRX5K-RE3-128G-R Juniper SRX5000 Routing Engine plug-in module
SRX5K-RE3-128G-R Overview
Equipped with the full range of security features, the SRX5800 is ideally suited for securing large enterprise centers and co-located data centers, it can also be deployed to secure service provider infrastructures as well as services. The SRX5800 services gateway, the market-leading security solution, supports more than 120Gbps firewall, 30Gbps IDP, and 350,000 connections per second.
SKU: SRX5K-RE3-128G-R -
Juniper Expansion Modules
SRX5K-RE3-128G-BB Juniper SRX5000 Routing Engine plug-in module
SRX5K-RE3-128G-BB Overview
Equipped with the full range of security features, the SRX5800 is ideally suited for securing large enterprise centers and co-located data centers, it can also be deployed to secure service provider infrastructures as well as services. The SRX5800 services gateway, the market-leading security solution, supports more than 120Gbps firewall, 30Gbps IDP, and 350,000 connections per second.
SKU: SRX5K-RE3-128G-BB -
Juniper Expansion Modules
SRX5K-MPC3-40G10G Juniper Modular Port Concentrator module
SRX5K-MPC3-40G10G Overview
The (IOC3) is an interface card that provides 10 Gigabit Ethernet and 40 Gigabit Ethernet interfaces, with a Packet Forwarding Engine that provides a 240 Gbps line rate. This interface card is supported on SRX5400, SRX5600, and SRX5800 Services Gateways.
SKU: SRX5K-MPC3-40G10G -
Juniper Expansion Modules
MPC10E-10C-P-BASE Juniper MX Series Modular Port Concentrator
MPC10E-10C-P-BASE Overview
Modular Port Concentrators (MPCs) are a set of next-generation advanced line modules for Juniper Networks MX Series 3D Universal Edge Routers that deliver the performance, services, and scalability that are critical to today’s advanced Ethernet services edge and broadband edge networks. Designed for flexibility, MPCs introduce both the industry’s highest capacity and modular 1GbE and 10GbE hardware to the MX Series portfolio, allowing customers to flexibly mix and match interfaces to create service-specific and “pay as you grow” configurations.
SKU: MPC10E-10C-P-BASE -
Juniper Expansion Modules
NS-ISG-SEC Juniper Networks Security Module expansion module
NS-ISG-SEC Overview
The Security Modules incorporate technology specifically designed to accelerate Intrusion Prevention performance. Some of the IDP functions that are accelerated via the Security Module include pattern-matching acceleration algorithms, enabling the Juniper Networks ISG Series to perform high performance parallel signature matching, and perform line breaking, which is essential for high-speed processing of text based protocol streams like HTTP, SMTP and POP3.
SKU: NS-ISG-SEC -
Juniper Expansion Modules
PB-4GE-SFP Juniper Networks expansion module
PB-4GE-SFP Overview
Juniper Networks has further enhanced its portfolio with the advent of Ethernet Intelligent Queuing (IQ) Physical Interface Cards (PICs). These advanced PICs are based on the Q Performance Processor (QPP), a custom high-performance ASIC designed to deliver granular per-VLAN quality-of-service (QoS) capabilities along with extensive instrumentation and diagnostics on a per-VLAN and per-MAC address basis.
SKU: PB-4GE-SFP -
-
Juniper Expansion Modules
JXM-1T1-S Netscreen 1 port T1 Mini Physical Interface Module
JXM-1T1-S Overview
The Juniper Networks optional single-port T1 Mini Physical Interface Modules (Mini-PIM) for the SSG 20 platform complement the five on-board 10/100 Ethernet interfaces with expanded WAN connectivity. The T1 Mini-PIMs include one physical T1 port with an integrated CSU/DSU.
SKU: JXM-1T1-S -
Juniper Expansion Modules
JXM-1E1-S Netscreen 1 port E1 Mini Physical Interface Module
JXM-1E1-S Overview
The Juniper Networks optional single-port E1 Mini Physical Interface Modules (Mini-PIM) for the SSG 20 platform complement the five on-board 10/100 Ethernet interfaces with expanded WAN connectivity. The E1 Mini-PIMs include one physical E1 port with an integrated CSU/DSU.
SKU: JXM-1E1-S -
Juniper Expansion Modules
JXM-1ADSL2-B-S Netscreen 1 port ADSL2+ Annex B Mini Interface
JXM-1ADSL2-B-S Overview
The Juniper Networks single-port ADSL2/2+ Mini Physical Interface Modules (Mini-PIM) for the SSG 20 platform complement the five onboard 10/100 Ethernet interfaces with expanded WAN connectivity. The ADSL2/2+ Annex A (over POTS) and ADSL2/2+ Annex B (over ISDN) both include one physical port with support for ADSL, ADSL2 or ADSL2+ protocols.
SKU: JXM-1ADSL2-B-S -
Juniper Expansion Modules
JX-1BRI-ST-S Juniper 1 port ISDN S/T BRI Physical Interface Module
JX-1BRI-ST-S Overview
The Juniper Networks single-port ISDN BRI Physical Interface Modules (PIM) complement the 10 onboard Ethernet interfaces with expanded WAN connectivity. The ISDN BRI PIM includes a single physical port supporting ISDN BRI S/T interface types.
SKU: JX-1BRI-ST-S -
Juniper Expansion Modules
JX-2SHDSL-S Juniper G.SHDSL Physical Interface Module DSL modem
JX-2SHDSL-S Overview
The Juniper G.SHDSL PIM (Physical Interface Module) provides the physical connection to G.SHDSL network media types, receiving incoming packets from the network and transmitting outgoing packets to the network. The Juniper G.SHDSL PIM is equipped with a dedicated network processor that forwards incoming data packets to the Routing Engine, and receives outgoing data packets from the Routing Engine. During this process, the PIM performs framing and line-speed signaling.
SKU: JX-2SHDSL-S -
Juniper Expansion Modules
PE-4DS3-ATM2 Juniper Networks ATM2 IQ Physical 4-port Interface Card
PE-4DS3-ATM2 Overview
Supported by both the Juniper Networks M-series and T-series routers, the ATM2 Intelligent Queuing (IQ) PICs are available in 4-port DS3, 2-port and 4-port E3, 2-port OC-3, 1-port OC-12, and 2-port OC-12 versions. The ATM2 IQ PICs leverage the JUNOS operating system’s MPLS traffic engineering and hardware-based QoS capabilities to deliver seamless transport of multiservice traffic over the IP/MPLS infrastructure. Designed to provide rich, granular ATM QoS and signaling functionalities, the ATM2 IQ PICs are a key element in the delivery of a guaranteed high-quality, end-to-end user experience.
SKU: PE-4DS3-ATM2 -
Juniper Expansion Modules
DPCE-R-4XGE-XFP Juniper Dense Port Concentrator expansion module
DPCE-R-4XGE-XFP Overview
DPCs provide multiple physical interfaces and Packet Forwarding Engines on a single board that installs in a slot in the Juniper Networks MX-series Ethernet Services Router. A DPC receives incoming packets from the network and sends outgoing packets to the network. The Packet Forwarding Engines on a DPC are equipped with purpose-built application-specific integrated circuits (ASICs) that perform packet processing and forwarding. Each Packet Forwarding Engine consists of one I-chip for Layer 3 processing and one Layer 2 network processor.
SKU: DPCE-R-4XGE-XFP -
Juniper Expansion Modules
PE-TUNNEL Juniper Networks Tunnel Services PIC device upgrade kit
PE-TUNNEL Overview
receives incoming packets from the network and transmits outgoing packets to the network. During this process, each performs framing and high-speed signaling for its media type.
SKU: PE-TUNNEL -
Juniper Expansion Modules
NS-5000-8G2-TX Juniper Secure Port Module 2 TX expansion module
NS-5000-8G2-TX Overview
Juniper NetScreen 5000 8 GigE Secure Port Module 2 (SPM) includes 8 x Gig copper transceivers. All gigabit I/O modules come with transceivers, 8 x 1Gbps copper transceivers included
SKU: NS-5000-8G2-TX -
Juniper Expansion Modules
NS-5000-2XGE-G4 Juniper Secure Port Module expansion module
NS-5000-2XGE-G4 Overview
Juniper Networks further expands overall system functionality and performance by introducing Secure Port Modules (SPMs). The SPMs take advantage of Juniper’s fourth generation security ASIC to deliver advanced functionality at multi-gigabit rates. These SPM modules deliver the Juniper heritage of high-performance security while expanding capabilities and capacities for customers.
SKU: NS-5000-2XGE-G4 -
Juniper Expansion Modules
DPCE-R-20GE-2XGE Juniper Dense Port Concentrator expansion module
DPCE-R-20GE-2XGE Overview
DPCs provide multiple physical interfaces and Packet Forwarding Engines on a single board that installs in a slot in the Juniper Networks MX-series Ethernet Services Router. A DPC receives incoming packets from the network and sends outgoing packets to the network. The Packet Forwarding Engines on a DPC are equipped with purpose-built application-specific integrated circuits (ASICs) that perform packet processing and forwarding. Each Packet Forwarding Engine consists of one I-chip for Layer 3 processing and one Layer 2 network processor.
SKU: DPCE-R-20GE-2XGE -
Juniper Expansion Modules
EX8208-SRE320 Juniper Networks Routing Engine router plug in module
EX8208-SRE320 Overview
The Routing Engine maintains the routing tables and controls the routing protocols, as well as the JUNOS software processes that control the router’s interfaces, the chassis components, system management, and user access to the router.
SKU: EX8208-SRE320 -
Juniper Expansion Modules
SRX3K-NPC Juniper Networks SRX 3000 Network Processing Card
SRX3K-NPC Overview
To ensure maximum processing performance and flexibility, the SRX3000 line of service gateway utilizes the SRX 3000 Network Processing Card (NPC) to distribute inbound and outbound traffic to the appropriate SPCs and IOCs, apply QoS, and enforce DOS/DDoS protections.
SKU: SRX3K-NPC -
Juniper Expansion Modules
SRX3K-2XGE-XFP Juniper Networks expansion module
SRX3K-2XGE-XFP Overview
The IOC adds two ports for 10-Gigabit Ethernet traffic from fiber interface media. It is inserted horizontally into the midplane of the services gateway to communicate with the switch fabric board (SFB) and to receive power. To use fiber interface media, install 10-Gigabit small form-factor pluggable (XFP) transceivers on the desired ports. LEDs on the faceplate of the IOC indicate port status and connectivity.
SKU: SRX3K-2XGE-XFP -
Juniper Expansion Modules
SRX3K-16GE-SFP Juniper SFP Ethernet I/O Card for SRX3000
SRX3K-16GE-SFP Overview
The switches 16 ports of Gigabit Ethernet traffic from either a copper or a fiber interface media. It is inserted horizontally into the midplane of the device to communicate with the Switch Fabric Board (SFB) and to receive power.
SKU: SRX3K-16GE-SFP
