JD491A HP 100Mbps 100Base-BX-D Single-mode SFP Module
Out of stock
JD491A Overview
HPE Compatible 100BASE-BX-D SFP Transceiver Module (SMF, 1550nm-TX/1310nm-RX, 15km, LC, DOM)
The HPE-compatible SFP transceiver provides up to 15km of 100Base-BX throughput over single-mode fiber (SMF) using 1550nm-TX/1310nm-RX wavelengths via LC simplex connectors. This bi-directional unit must be used with another transceiver or network equipment of complementary wavelengths. It provides 100BASE Ethernet connectivity options for Fast Ethernet and Data Centers.
$0
Out of stock
JD491A Technical Specifications
HP 100Mbps 100Base-BX-D Single-mode Fiber 10km 1550nmTX/1310nmRX LC Connector SFP Transceiver Module
Manufacturer: HP
HP: Transceiver
Network
Transceiver Type: SFP
Data Transfer Rate: 100 Mbps
100Base-BX-D
Ethernet Technology: Fast Ethernet
Connector Type: LC Connector
Single-mode Fiber (SMF)
Related products
-
Cisco Transceivers
SFP-OC48-LR2, Cisco OC-48c/STM-16c SFP, Long Reach
SFP-OC48-LR2 Overview
The Cisco industry-standard Small Form-Factor Pluggable Interface Converter (SFP) for packet-over-SONET/SDH (POS), optical networking, and ATM applications is hot-swappable optical interface that plug into a variety of ports on Cisco router interfaces. This SFP optics support OC-48 data rates for Long-Reach.
SKU: SFP-OC48-LR2 -
Cisco Transceivers
GLC-BX-U Cisco 1000BASE-BX10 SFP Transceiver Module
GLC-BX-U Overview
A mode-conditioning patch cord, as specified by the IEEE standard, is required regardless of the span length. Note how the mode conditioning patch cord for 62.5-μm fibers has a different specification from the mode-conditioning patch cord for 50-μm fibers.ITU-T G.652 SMF as specified by the IEEE 802.3z standard.Specified at transmission wavelength.
SKU: GLC-BX-U -
Cisco Transceivers
GLC-ZX-SMD Cisco LC to PC Single-Mode SFP Transceiver 1 GBPS
GLC-ZX-SMD Overview
Cisco GLC-ZX-SMD is a 1000BASE-ZX SFP for Long-Reach Single-Mode Fiber. The 1000BASE-ZX SFP operates on standard single-mode fiber-optic link spans of up to approximately 70 km in length. The SFP provides an optical link budget of 21 dB, but the precise link span length depends on multiple factors such as fiber quality, number of splices, and connectors.When shorter distances of single-mode fiber (SMF) are used, it might be necessary to insert an inline optical attenuator in the link to avoid overloading the receiver. A 10-dB inline optical attenuator should be inserted between the fiber-optic cable plant and the receiving port on the SFP at each end of the link whenever the fiber-optic cable span loss is less than 8 dB.
SKU: GLC-ZX-SMD -
Cisco Transceivers
GLC-EX-SMD Cisco SFP (mini-GBIC) Transceiver Module – LC/PC
GLC-EX-SMD Overview
The industry-standard Cisco® Small Form-Factor Pluggable (SFP) Gigabit Interface Converter links your switches and routers to the network. The hot-swappable input/output device plugs into a Gigabit Ethernet port or slot. Optical and copper models can be used on a wide variety of Cisco products and intermixed in combinations of 1000BASE-T, 1000BASE-SX, 1000BASE-LX/LH, 1000BASE-EX, 1000BASE-ZX, or 1000BASE-BX10-D/U on a port-by-port basis. is 1000BASE-EX long-wavelength; with DOM.
SKU: GLC-EX-SMD
