OC3-SFP-LR1 Alcatel-Lucent ATM-155Mbps SFP, Single Mode Fiber
Out of stock
OC3-SFP-LR1 Overview
Alcatel-Lucent ATM-155Mbps SFP, Single Mode Fiber up to 40km
$0
Out of stock
OC3-SFP-LR1 Technical Specifications
Alcatel-Lucent ATM-155Mbps SFP, Single Mode Fiber
Form Factor: SFP
Data Rate: 155Mbps
Wavelength: 1310nm
Connector: LC Duplex
Cable Type: SMF
Reach Distance: 40KM
Operating Temperature Range: 0 ºC to 70ºC
Digital Optical Monitoring (DOM): Not Supported
Applications: OC-3 LR-1
Related products
-
-
Cisco Transceivers
GLC-FE-100FX, Cisco 100B-FX SFP Module LC Multi-Mode
GLC-FE-100FX Overview
The Cisco 100BASE-FX Small Form-factor Pluggable (SFP) is a hot-swappable input/output device that plugs into a Fast Ethernet port or slot, linking the port with the network. It operates on ordinary multimode fiber-optic (MMF) link spans up to 2 kilometers long. Supports the Cisco quality ID feature that enables the switch or router to identify whether or not the SFP is a Cisco qualified SFP
SKU: GLC-FE-100FX -
Cisco Transceivers
GLC-BX-U Cisco 1000BASE-BX10 SFP Transceiver Module
GLC-BX-U Overview
A mode-conditioning patch cord, as specified by the IEEE standard, is required regardless of the span length. Note how the mode conditioning patch cord for 62.5-μm fibers has a different specification from the mode-conditioning patch cord for 50-μm fibers.ITU-T G.652 SMF as specified by the IEEE 802.3z standard.Specified at transmission wavelength.
SKU: GLC-BX-U -
Cisco Transceivers
GLC-ZX-SMD Cisco LC to PC Single-Mode SFP Transceiver 1 GBPS
GLC-ZX-SMD Overview
Cisco GLC-ZX-SMD is a 1000BASE-ZX SFP for Long-Reach Single-Mode Fiber. The 1000BASE-ZX SFP operates on standard single-mode fiber-optic link spans of up to approximately 70 km in length. The SFP provides an optical link budget of 21 dB, but the precise link span length depends on multiple factors such as fiber quality, number of splices, and connectors.When shorter distances of single-mode fiber (SMF) are used, it might be necessary to insert an inline optical attenuator in the link to avoid overloading the receiver. A 10-dB inline optical attenuator should be inserted between the fiber-optic cable plant and the receiving port on the SFP at each end of the link whenever the fiber-optic cable span loss is less than 8 dB.
SKU: GLC-ZX-SMD
