Direct Attach Copper Cable
Direct Attach Copper Cable
Showing 1–25 of 50 resultsSorted by popularity
-
HPE Transceivers
JH697A HP X240 40G QSFP+ to QSFP+ 1m Direct Attach Copper Cable
JH697A Overview
The HPE 40GbE/4x10GbE/4x8Gb FC QSFP+ Transceiver delivers a full-duplex optical module with four independent transmit and receive channels supporting multiple data rate configurations including 40 GbE, 4×8 Gb and 4×10 GbE for high-density applications and improving performance.
SKU: JH697A -
HPE Transceivers
JD095C HP 0.65m 10Gbps SFP+ to SFP+ Direct Attach Copper Cable
JD095C Overview
HPE H3C JD095C Compatible 65cm 10G SFP+ Twinax Copper Cable (SFP+ to SFP+ DAC Cable, Passive AWG30 65cm)
The DAC SFP+ cable assemblies are high-performance, cost-effective I/O solutions for 10Gb Ethernet and 10G Fibre Channel applications. SFP+ passive copper modules allow hardware manufacturers to achieve high port density, configurability, and utilization at a very low cost and to reduce power budget. The high-speed cable assemblies meet and exceed the performance and reliability requirements stipulated by Gigabit Ethernet and Fibre Channel industry standards.SKU: JD095C -
HPE Transceivers
JC784C HP 10G 7m SFP+ Direct Attach Copper Cable
JC784C Overview (Bulk Pack)
HP JC784C Compatible 10G SFP+ Direct Attach Copper Twinax Cable(Passive DAC, 7m, 24AWG)
This compatible SFP+ DAC is a high performance and cost-effective direct attach copper cable with a length of 7 meters. It supports the bandwidth transmission requirements as defined by 10 Gigabit-Ethernet (10GBase-CU), 8G Fiber Channel (FC) and 10G Fiber Channel over Ethernet (FCoE). The product is designed for short reach links in high-speed interconnecting networking applications such as high-performance computing (HPC), enterprise networking including top-of-rack switching and network storage markets. This product is programmed to works with HP 10G switches, routers, network interface cards (NICs) and network storage systems. It’s proven to be a cost-effective alternative to high-cost HP X240 10G SFP+ 7m Direct Attach Copper Cable.
SKU: JC784C -
HPE Transceivers
844480-B21 HP 25Gb SFP28 5m Direct Attach Copper Cable
844480-B21 Overview (Bulk Pack)
HP 25Gb SFP28 to SFP28 5m Direct Attach Copper Cable SFP28 for Network Device 3.13 GB/s 16.40 ft 1 x SFP28 Network 1 x SFP28 Network. HPE SFP28 Direct Attach Cables are designed to meet the increasing demand of higher bandwidth in the data center. 2.5x bandwidth over 10 Gb allows reduction of the number of cables and connection ports required to achieve higher bandwidth throughput. With similar prices as those of 10 Gb cables, these cables can significantly reduce CapEx and OpEx spending on interconnect connections. 0.5-5m connection distance allows efficient and cost-effective in-rack communications
SKU: 844480-B21 -
Cisco Transceivers
QDD-400-CU3M Cisco 400G QSFP-DD Copper Twinax Cable
QDD-400-CU3M Overview
Cisco 400G QSFP-DD DAC Twinax Cable (3-meter, Passive, QSFP-DD to QSFP-DD, 28AWG)
The 400G QSFP-DD DAC provides a QSFP-DD-to-QSFP-DD copper direct-attach solution and it is suitable for very short links and offer a cost-effective way to establish a 400-Gigabit link between QSFP-400G ports of switches/routers within racks and across adjacent racks. This DAC is designed with ultra-low loss materials, square rings, twisted pair cable 8 wires and shell extension construction for superior mechanical properties and bending performance. It is tested in actual switching systems to ensure optimal signal integrity and the best end-to-end performance.
SKU: QDD-400-CU3M -
Cisco Transceivers
QDD-400-CU2M Cisco 400G QSFP-DD Copper Twinax Cable
QDD-400-CU2M Overview
Cisco 400G QSFP-DD DAC Twinax Cable (2-meter, Passive, QSFP-DD to QSFP-DD, 28AWG)
The 400G QSFP-DD DAC provides a QSFP-DD-to-QSFP-DD copper direct-attach solution and it is suitable for very short links and offer a cost-effective way to establish a 400-Gigabit link between QSFP-400G ports of switches/routers within racks and across adjacent racks. This DAC is designed with ultra-low loss materials, square rings, twisted pair cable 8 wires and shell extension construction for superior mechanical properties and bending performance. It is tested in actual switching systems to ensure optimal signal integrity and the best end-to-end performance.
SKU: QDD-400-CU2M -
Cisco Transceivers
QDD-400-CU2.5M Cisco 400G QSFP-DD Copper Twinax Cable
QDD-400-CU2.5M Overview
Cisco 400G QSFP-DD DAC Twinax Cable (2.5-meter, Passive, QSFP-DD to QSFP-DD, 28AWG)
The 400G QSFP-DD DAC provides a QSFP-DD-to-QSFP-DD copper direct-attach solution and it is suitable for very short links and offer a cost-effective way to establish a 400-Gigabit link between QSFP-400G ports of switches/routers within racks and across adjacent racks. This DAC is designed with ultra-low loss materials, square rings, twisted pair cable 8 wires and shell extension construction for superior mechanical properties and bending performance. It is tested in actual switching systems to ensure optimal signal integrity and the best end-to-end performance.
SKU: QDD-400-CU2.5M -
Cisco Transceivers
QDD-400-CU1M Cisco 400G QSFP-DD Passive Copper Twinax Cable
QDD-400-CU1M Overview
Cisco 400G QSFP-DD DAC Twinax Cable (1-meter, Passive, QSFP-DD to QSFP-DD, 30AWG)
The 400G QSFP-DD DAC provides a QSFP-DD-to-QSFP-DD copper direct-attach solution and it is suitable for very short links and offer a cost-effective way to establish a 400-Gigabit link between QSFP-400G ports of switches/routers within racks and across adjacent racks. This DAC is designed with ultra-low loss materials, square rings, twisted pair cable 8 wires and shell extension construction for superior mechanical properties and bending performance. It is tested in actual switching systems to ensure optimal signal integrity and the best end-to-end performance.
SKU: QDD-400-CU1M -
Juniper Transceivers
JNP-SFP-25G-DAC-5M Juniper Compatible – 5m 25G SFP+
JNP-SFP-25G-DAC-5M Overview
The Juniper Networks JNP-SFP-25G-DAC-5M Compatible 25G SFP28 Passive Direct Attach Copper Twinax Cable is designed for use in 25GBASE Ethernet. This cable is compliant with IEEE P802.3by Ethernet standard and SFP28 MSA Compliant. Each SFP28 connector comprises an EEPROM providing product information which can be read by the host system. With these features, this easy to install, high speed, cost-effective direct attach copper twinax Cable is suitable for short-distance connectivity within a rack or between adjacent racks in data centers.
SKU: JNP-SFP-25G-DAC-5M -
Juniper Transceivers
QFX-SFP-DAC-5M Juniper SFP+ Direct Attach Cable
QFX-SFP-DAC-5M Overview
Juniper SFP+ 10 Gigabit Ethernet Direct Attach Copper (Twinax Copper Cable) 5m. Small form-factor pluggable plus (SFP+) direct attach copper (DAC) cables, also known as Twinax cables, are suitable for in-rack connections between servers and either the QFX5100-48S or QFX3500 devices. The cables are hot-removable and hot-insertable. A cable consists of a cable assembly that connects directly into two SFP+ modules, one at each end of the cable. The cables use integrated duplex serial data links for bidirectional communication and are designed for data rates up to 10 Gbps.
SKU: QFX-SFP-DAC-5M -
Juniper Transceivers
QFX-SFP-DAC-3MA Juniper Networks SFP+10 Gigabit Ethernet
QFX-SFP-DAC-3MA Overview
Juniper Networks SFP+ 10 Gigabit Ethernet Direct Attach Copper – direct att. The cables are hot-removable and hot-insertable. A cable consists of a cable assembly that connects directly into two SFP+ modules, one at each end of the cable. The cables use integrated duplex serial data links for bidirectional communication and are designed for data rates up to 10 Gbps.
SKU: QFX-SFP-DAC-3MA -
Juniper Transceivers
JNP-QSFP-DAC-5M Juniper Networks 40 Gigabit Ethernet
JNP-QSFP-DAC-5M Overview
Juniper Networks 40 Gigabit Ethernet Direct Attach Copper Cable. Quad small form-factor pluggable plus (QSFP+) direct attach copper (DAC) cables are suitable for in-rack connections between QSFP+ ports on EX3400, EX4300, EX4550, and EX4600 switches. They are suitable for short distances
SKU: JNP-QSFP-DAC-5M -
Juniper Transceivers
QFX-SFP-DAC-1M Juniper SFP+ 10 Gigabit Direct Attach Copper cable
QFX-SFP-DAC-1M Overview
Ensure reliable performance in your network connections with this Juniper Networks SFP+ to SFP+ direct-attach cable. This passive twinaxial copper cable supports 10 Gigabit Ethernet applications and has a maximum reach of 1.0 m (3.3 ft). Compatible with Juniper Networks QFX5200, QFX5100, QFX3000, QFX10000, and ACX5000 series products.
SKU: QFX-SFP-DAC-1M -
Juniper Transceivers
EX-QSFP-40GE-DAC50CM Juniper Networks Direct Attach Copper Cable
EX-QSFP-40GE-DAC50CM Ovrview
Manage network connections efficiently with the Juniper Networks 40 Gigabit Ethernet Direct Attach Copper Cable. This 1.6 ft. cable has a QSFP+ to QSFP+ connector.
SKU: EX-QSFP-40GE-DAC50CM -
Juniper Transceivers
EX-QSFP-40GE-DAC-50CM Juniper Networks Direct Attach Copper Cable
EX-QSFP-40GE-DAC-50CM Overview
The Juniper Networks Attach Copper Network Cable provides efficient wire connectivity to meet the bandwidth needs required in data centers and cloud-based services. This cable features a length of 1.6 ft.
SKU: EX-QSFP-40GE-DAC-50CM -
HPE Transceivers
720202-B21 HP 40g Qsfp+ To Qsfp+ 5m Direct Attach Copper Cable
720202-B21 Overview
This is a high-quality HPE Networks Compatible 40G QSFP+ Passive DAC (Direct Attach Cable) Copper. It is a cost-effective solution that provides high bandwidth and transmission rates over short distances. QSFP+ (Quad Small Form-factor Pluggable Plus) Cable Assemblies are suitable for very short distances and offer a highly cost-effective way to establish a 40-Gigabit link between QSFP+ ports of QSFP+ switches within racks and across adjacent racks. QSFP+ cables are used for 40 GbE and Infiniband standards
SKU: 720202-B21 -
HPE Transceivers
487652-B21 HPE Bladesystem C-Class 10GbE SFP+ to SFP+ Cable
487652-B21 Overview
HPE Networks Compatible SFP-10G-DAC, 10G SFP+ Passive DAC (Direct Attach Cable) Copper Twinax cable. A cost-effective solution that provides high bandwidth and transmission rates over short distances. SFP+ Copper Twinax cables are suitable for very short distances and offer a highly cost-effective connection within racks and across adjacent racks. DAC cables offer a low-cost SFP+ solution. SFP+ directly attached Twinax cable assemblies supports 10 Gigabit Ethernet.
SKU: 487652-B21 -
HPE Transceivers
JG331A HP X240 Direct Attach Copper Splitter Cable Network Cable
JG331A Overview
The HPE Compatible 40G QSFP+ to 4 x 10G SFP+ Direct Attach Cable operates over passive copper, which requires no additional power to ensure quality connectivity. This breakout cable is compliant with SFF-8436, SFF-8431 and SFP+ & QSFP MSA standards.
It provides a connection of a 40G QSFP+ port on one end and to four 10G SFP+ ports on the other end and is suitable for cost-effective close-range interconnections within the equipment room of telecom operators or data centers, etc.SKU: JG331A -
HPE Transceivers
JG329A HP X240 Direct Attach Copper Splitter Cable Network Cable
JG329A Overview
HP X240 Direct Attach Copper Splitter Cable Network Cable QSFP+ SFP+ 3.3 Ft. The HPE is a Direct Attach Cable. Direct Attach Cables provide users with an efficient way of making various connections in the data center over a number of distances. Direct attach cables are cost effective and durable
SKU: JG329A
