HPE Transceivers
Showing 401–425 of 575 resultsSorted by popularity
-
HPE Transceivers
JC860A HP S136 10Gbps 10GBase-LR Single-mode Fiber SFP+ Module
JC860A Overview
HPE Networks Compatible 10G SFP+ Module – Single-mode 1310nm Wavelength for up to 10km with Standard Compatability
This high-quality HPE Networks Compatible 10GBASE-LR SFP+ 1310nm 10km DOM Transceiver. A cost-effective solution that provides high bandwidth and transmission rates over short distances.
SKU: JC860A -
HPE Transceivers
JC859A HP S136 10Gbps 10GBase-SR Multi-mode Fibera SFP+ Module
JC859A Overview
HP S136 10G LC-SR Compatible Transceiver ModuleSFP-10G85-3MC-HP (JC859A S136 10G LC-SR)Â multi-mode transceiver is SFP+ module for duplex optical data communications such as 10GBASE-SR and 10GBASE-SW. This transceiver offers the same function with HP JC859A and it is fully compatible with HP devices. It is with the SFP+ 20-pin connector to allow hot plug capability. Digital diagnostic functions are available via an I2C. This module is designed for multi-mode fiber and operates at a nominal wavelength of 850 nm.The transmitter section uses a Vertical Cavity Surface Emitted Laser (VCSEL) and is a Class 1 laser compliant according to International Safety Standard IEC 60825. The receiver section uses an integrated GaAs detector preamplifier (IDP) mounted in an optical header and a limiting post-amplifier IC.SKU: JC859A -
HPE Transceivers
J9283B HP Procurve 10GBe Sfp 3m Direct Attach Cable
J9283B Overview
HP Procurve 10GBe Sfp 3m Direct Attach Cable. This passive Twinax copper cable supports 10 Gigabit Ethernet applications connected through SFP+ (Mini-GBIC) ports. This copper SFP+ cable is hot-swappable, making upgrades and replacements seamless by minimizing network disruptions.Designed for high-speed performance, this low-power, low-latency SFP+ cable is a cost-effective alternative to fiber-optic cable assemblies, supporting short-distance applications such as point-to-point in-rack network switch or server connections.
SKU: J9283B -
HPE Transceivers
J9283A HP A low-cost 10-Gigabit connectivity 3-meter cable with SFP+
J9283A Overview
HPE Aruba Compatible 3m 10G SFP+ Twinax Copper Cable (SFP+ to SFP+ DAC Cable, Passive AWG30 3m)
The DAC SFP+ cable assemblies are high-performance, cost-effective I/O solutions for 10Gb Ethernet and 10G Fibre Channel applications. SFP+ passive copper modules allow hardware manufacturers to achieve high port density, configurability, and utilization at a very low cost and to reduce power budget. The high-speed cable assemblies meet and exceed the performance and reliability requirements stipulated by Gigabit Ethernet and Fibre Channel industry standards.
SKU: J9283A -
HPE Transceivers
J9281B HPE X242 SFP+ SFP+ 3 m Direct Attach Cable
J9281B Overview
This is an HPE compatible 10GBase-CU SFP+ to SFP+ direct attach cable that operates over passive copper with a maximum reach of 1.0m (3.3ft). It has been programmed, uniquely serialized, and data-traffic and application tested to ensure it is 100% compliant and functional. Our direct attach cables are built to comply with MSA (Multi-Source Agreement) standards.
SKU: J9281B -
HPE Transceivers
AP820A HP 5m B-series Active Copper Sfp+ Cable
AP820A Overview
HP compatible 10GBase-CU SFP+ to SFP+ direct attach cable (Passive Copper, 5m). A 100% HP compatible 10GBase-CU SFP+ to SFP+ twinax direct attached cable that operates over passive copper, with a maximum reach of 5.00m (16.40ft). This HP compatible twinax cable has been programmed, uniquely serialized, and data-traffic and application tested to ensure it is 100% compliant and functional. Our direct attached cable will initialize and perform identically to HP’s cable and is built to meet or exceed HP’s specifications, and comply with MSA (Multi-Source Agreement) standards.
SKU: AP820A -
-
HPE Transceivers
AP818A HP 1m B-series Active Copper Sfp+ Cabel
AP818A Overview
HP compatible 10GBase-CU SFP+ to SFP+ direct attach cable (Passive Copper, 1m). A 100% HP compatible 10GBase-CU SFP+ to SFP+ twinax direct attached cable that operates over passive copper, with a maximum reach of 1.00m (3.28ft). This HP compatible twinax cable has been programmed, uniquely serialized, and data-traffic and application tested to ensure it is 100% compliant and functional. Our direct attached cable will initialize and perform identically to HP’s cable and is built to meet or exceed HP’s specifications, and comply with MSA (Multi-Source Agreement) standards
SKU: AP818A -
HPE Transceivers
721064-B21 HP Blc 40g Qsfp+ 4x10g Sfp+ 3m Dac Cable
721064-B21 Overview
HPE 40G QSFP+ Direct Attach Copper Cables deliver 40 Gb high speed connections to meet the exponential data growth in data centers and cloud-based services. It provides cost-effective way to connect the 40Gb QSFP+ port with another QSFP+ port or four 10G SFP+ ports. Compared to 10 Gb solutions, the 40Gb QSFP+ technology provides superior switch port density with lower costs. In addition, bandwidth consolidation allows reduction of cabling complexity, power and cooling and freeing space. HPE 40G QSFP+ Direct Attach Cables offer flexibility with a choice of up to 5m length.
SKU: 721064-B21 -
HPE Transceivers
720202-B21 HP 40g Qsfp+ To Qsfp+ 5m Direct Attach Copper Cable
720202-B21 Overview
This is a high-quality HPE Networks Compatible 40G QSFP+ Passive DAC (Direct Attach Cable) Copper. It is a cost-effective solution that provides high bandwidth and transmission rates over short distances. QSFP+ (Quad Small Form-factor Pluggable Plus) Cable Assemblies are suitable for very short distances and offer a highly cost-effective way to establish a 40-Gigabit link between QSFP+ ports of QSFP+ switches within racks and across adjacent racks. QSFP+ cables are used for 40 GbE and Infiniband standards
SKU: 720202-B21
