Controllers
Showing 1701–1725 of 1952 resultsSorted by popularity
-
StarTech.com Controllers
ST1000BT32 StarTech.com 1 Port PCI 32 Bit Gigabit Ethernet Network Adapter Card
StarTech.com ControllersST1000BT32 StarTech.com 1 Port PCI 32 Bit Gigabit Ethernet Network Adapter Card
ST1000BT32 Overview
This PCI-based 10/100/1000 Mbps Gigabit Ethernet Network Adapter Card provides a simple connection to a Gigabit Ethernet network, and is fully compatible with IEEE 802.3, 802.3u, 802.3ab and 802.3x standards.
Suitable for any PCI-enabled client, server or workstation, the Gigabit Ethernet Network Adapter Card supports high performance dual channel networking and maximum data transfer speeds of 1000Mbps in each direction (2000 Mbps total) – up to ten times faster than 10/100 Ethernet.SKU: ST1000BT32 -
StarTech.com Controllers
ST1000SPEX2 StarTech.com 1 Port PCIe Gigabit PCIe Network Card – NIC Adapter
StarTech.com ControllersST1000SPEX2 StarTech.com 1 Port PCIe Gigabit PCIe Network Card – NIC Adapter
ST1000SPEX2 Overview
Add a 10/100/1000Mbps Ethernet port to any PC through a PCI Express slot. The ST1000SPEX2 PCIe Gigabit Ethernet Network Card adds a 10/100/1000 Mbps compatible RJ45 Ethernet port to a PCI Express-enabled client, server or workstation, providing a convenient addition or replacement networking interface.
SKU: ST1000SPEX2 -
StarTech.com Controllers
PEX2S953 StarTech.com 2-port PCI Express RS232 Serial Adapter Card
PEX2S953 Overview
This multiport PCI Express RS232 serial adapter card lets you add two RS232 (DB9) serial ports to your computer through a PCI Express (PCIe) slot, as if they were native serial ports. The dual port PCIe serial card enables you to interact with serial devices, such as card readers, printers, PIN pads, and modems, at speeds of up to 921.6Kbps.
SKU: PEX2S953 -
StarTech.com Controllers
PCI2S4851050 StarTech.com 2 Port PCI RS422/485 Serial Adapter Card with 161050 UART
StarTech.com ControllersPCI2S4851050 StarTech.com 2 Port PCI RS422/485 Serial Adapter Card with 161050 UART
PCI2S4851050 Overview
Add two RS422/485 serial ports through a standard or low profile PCI expansion slot. The PCI2S4851050 2-Port PCI Serial Adapter Card (RS422/RS485) with 161050 UART adds two DB9 RS422/RS485 serial ports, using a single PCI expansion slot.
The PCI serial card offers a high performance 16C1050 UART and supports both 2-wire and 4-wire RS485 modes. The card delivers an efficient single-chip design and a large 256-byte transit/receive FIFO buffer that work together to provide high-speed serial communication while reducing the overall load on the system CPU.SKU: PCI2S4851050 -
Tripp Lite Controllers
PCE-1M2-PX4 Tripp Lite M.2 NGFF PCIE SSD (M-Key) PCI Express X4
PCE-1M2-PX4 Overview
The high-performance M.2 NGFF PCIe SSD (M-Key) PCI Express Card enhances your computer’s speed and increases the amount of internal storage by adding an M.2 PCI Express (PCIe) SSD (M-Key) drive. You can add an ultra-fast four-lane M.2 SSD, such as a Samsung 950 Pro or Samsung SM 951, to a computer or server with an available x4, x8 or x16 PCI Express expansion slot.This lets you keep your operating system on your M.2 PCIe drive, while using larger platter drives for bulk storage. Its plug-and-play design requires no software, driver or external power supply, so setting up the card is easy enough. Just connect your drive
SKU: PCE-1M2-PX4 -
Tripp Lite Controllers
PCE-1G-01-LP Tripp Lite 1-Port Gigabit Ethernet PCI Network Card Adapter
PCE-1G-01-LP Overview
The high-performance PCE-1G-01-LP 1-Port Gigabit Ethernet PCI Express Card adds a 10/100/1000 Mbps network card and RJ45 Ethernet port to your computer or server. By adding the PCE-1G-01-LP to a computer with either no networking capabilities or 10/100 Ethernet, you can upgrade to Gigabit Ethernet capability without having to buy a new computer. It supports 10/100/1000 Mbps data rate auto-negotiation.
SKU: PCE-1G-01-LP -
Tripp Lite Controllers
PCE-1G-01 Tripp Lite 1-Port Gigabit Ethernet PCI Network Card Adapter
PCE-1G-01 Overview
The high-performance PCE-1G-01 1-Port Gigabit Ethernet PCI Express Card adds a 10/100/1000 Mbps network card and RJ45 Ethernet port to your computer or server. By adding the PCE-1G-01 to a computer with either no networking capabilities or 10/100 Ethernet, you can upgrade to Gigabit Ethernet capability without having to buy a new computer. It supports 10/100/1000 Mbps data rate auto-negotiation.
SKU: PCE-1G-01 -
StarTech.com Controllers
ST1000SPEX43 StarTech.com 4 Port PCIe Network Card – Standard Profile NIC – RJ45 Port
StarTech.com ControllersST1000SPEX43 StarTech.com 4 Port PCIe Network Card – Standard Profile NIC – RJ45 Port
ST1000SPEX43 Overview
This 4-port network card delivers powerful connectivity for your business, corporate or government office environment, with support for high-performance, 4-channel networking and a maximum throughput of up to 1000 Mbps in each direction (2000 Mbps total). The network adapter card features the Realtek RTL8111G chipset, which is designed to deliver the performance and enhanced capabilities you need for reliable network connections to your server or computer.
SKU: ST1000SPEX43 -
StarTech.com Controllers
ST4000SPEXI StarTech.com 4-Port Gigabit Network Card – PCIe Network Card, Intel I350
StarTech.com ControllersST4000SPEXI StarTech.com 4-Port Gigabit Network Card – PCIe Network Card, Intel I350
ST4000SPEXI Overview
This Gigabit Ethernet network card features the Intel I350-AM4 chipset, designed to deliver the power, performance and enhanced capabilities you need for reliable network connections to your server or computer. The Intel chip provides a number of advanced driver options including IEEE 802.3ad link aggregation / teaming support, which enables you to add additional bandwidth to your system.
SKU: ST4000SPEXI -
Tripp Lite Controllers
PCI-D9-02-LP Tripp Lite 2-Port Serial Adapter Card DB9 RS232 PCI Low Profile
PCI-D9-02-LP Overview
the PCI-D9-02-LP supports data transfer rates up to 115.2 Kbps on each port. It easily installs inside your computer in just a few minutes. The low-profile bracket’s interface is compatible with universal 3.3V and 5V 32-bit PCI/PCI-X slots. Allow the appropriate drivers to automatically install on your hard drive (a driver CD is included if they don’t), and connect DB9 serial extension cables (such as Tripp Lite’s P520-006) to the card’s DB9 connectors.
SKU: PCI-D9-02-LP -
SIIG Controller
NN-440012-S8 SIIG 1394 3-Port PCI i/e FireWire adapter PCI 3 ports
NN-440012-S8 Overview
This 1394 card adds three-ports (two external and one internal) to your PC or Mac computer for connecting portable hard disks, DV camcorders, digital cameras, and many other devices.
SKU: NN-440012-S8 -
SIIG Controller
NN-400012-S8 SIIG Inc 1394 3-Port PCI Firewire Adapter RoHS Compliant
NN-400012-S8 Overview
FireWire 3-Port PCI provides three external IEEE 1394 (FireWire) ports to support DV camcorders, hard disk, removable drives, scanners, printers and other 1394 audio/video devices including TV, VCR, DVD player with data transfer rates up to 400Mb/s. It supports both PC and Mac and works with many main brand DV camcorders for digital video creating/editing. Hot-swapping feature allows you to connect/disconnect devices without powering down the system.
SKU: NN-400012-S8 -
ATTO Controller
CTFC-322P-000 ATTO Celerity FC-322P host bus adapter
CTFC-322P-000 Overview
The ATTO Celerity FC-322P leverages two next-generation storage technologies – PCIe 4.0 interconnect and Gen 7 Fiber Channel to provide an advanced storage connectivity solution with high performance, intelligence and scalability. Celerity FC-322P 32Gb/s dual-channel HBAs deliver up to 6400 MB/s in a single PCIe slot solution, allowing original equipment manufacturers and system integrators to design state-of-the-art data infrastructures.
SKU: CTFC-322P-000 -
Comtrol Controller
31305-2 Comtrol RocketPort EXPRESS 4J serial adapter PCIe RS-232/422/485 x 4
31305-2 Overview
Comtrol’s RocketPort EXPRESS 4J serial port expansion card provides four “native” serial ports utilizing a single PCIe card slot and is compatible with all PCI Express bus architectures. The RJ45 serial ports, mounted on the edge of the card, support software configurable RS-232/422/485 serial communications at speeds up to 921.6 Kbps.
SKU: 31305-2 -
Cisco Controller
N2XX-AEPCI05 Cisco Systems Emulex Lpe 12002 Dual Port 8GB Fibre Channel HBA Usd
N2XX-AEPCI05 Overview
Streamlined installation and management, unrivaled scalability and virtualization support make the dual-channel Emulex LightPulse LPE12002 Fiber Channel Host Bus Adapter (HBA) an ideal solution for enterprise, mixed-operating system and virtual server environments. With powerful management capabilities and broad platform support, it delivers maximum performance in a broad range of applications and environments.
SKU: N2XX-AEPCI05 -
Cisco Controller
N2XX-AQPCI05 Cisco Systems Qlogic QLE2562 2 Port Fibre Channel 8GB HBA
N2XX-AQPCI05 Overview
The QLE2562 is a PCI Express, dual port, Fiber Channel (FC) Host Bus Adapter (HBA). The QLE2562 is part of the QLE2500 HBA product family that offers next generation 8Gb FC technology, meeting the business requirements of the enterprise data center. Virtualization Optimized. The QLE2562 delivers enhanced security, Quality of Service (QoS), and enables dynamic provisioning. The QLE2562 allows multiple logical (virtual) connections to share the same physical port. Each logical connection has its own resources and the ability to be managed independently.
SKU: N2XX-AQPCI05 -
StarTech.com Controllers
PEX4SFF8639 StarTech.com U.2 to PCIe Adapter for 2.5″ U.2 NVMe SSD SFF-8639 x4 PCIe
StarTech.com ControllersPEX4SFF8639 StarTech.com U.2 to PCIe Adapter for 2.5″ U.2 NVMe SSD SFF-8639 x4 PCIe
PEX4SFF8639 Overview
The expansion card lets you take full advantage of the fast performance and compact size of PCIe U.2 internal solid-state drives. The adapter connects directly to your computer motherboard to support an NVMe U.2 PCIe-based SSD through ultra-fast x4 PCIe. With the U.2 PCIe-based drive in place, the adapter gives your computer a significant speed boost.
SKU: PEX4SFF8639 -
StarTech.com Controllers
PEX4SFF8643 StarTech.com PCI Express x4 to SFF-8643 Adapter for PCIe NVMe U.2 SSD
StarTech.com ControllersPEX4SFF8643 StarTech.com PCI Express x4 to SFF-8643 Adapter for PCIe NVMe U.2 SSD
PEX4SFF8643 Overview
Unleash the performance of your desktop PC or server with this enterprise-class drive adapter. By providing compatibility with newer U.2 NVMe SSDs, such as the Intel® SSD 750 series, you can gain faster read/write speeds and higher productivity levels for data-intensive applications.
This drive adapter provides an ideal way to upgrade legacy motherboard platforms and your existing computer system, by adding compatibility for newer U.2 NVMe SSDs, which are designed to meet the high-performance needs of today’s data centers and enterprise-level applications.SKU: PEX4SFF8643 -
StarTech.com Controllers
PEX4M2E1 StarTech.com PCI Express 3.0 x4 to M.2 PCIe 3.0 NVMe SSD Adapter Card
StarTech.com ControllersPEX4M2E1 StarTech.com PCI Express 3.0 x4 to M.2 PCIe 3.0 NVMe SSD Adapter Card
PEX4M2E1 Overview
Get ultra-fast data access by adding aPCIe M.2 SSD to your existing computer.This adapter lets you add a high-speed, 4-lane M.2SSD (PCIe-based), such as a Samsung 950 Pro or Samsung SM 951, to a PC with an available x4 PCI Express expansion slot. You can mount the PCIeM.2drive directly onto the adapter, giving you an easy and convenientway to improve your system performance and expand overall internal storage.
SKU: PEX4M2E1 -
StarTech.com Controllers
DUAL-M2-PCIE-CARD-B StarTech.com AHCI, PCIe 4.0, PC/Linux
DUAL-M2-PCIE-CARD-B Overview
This Dual M.2 PCIe SSD Adapter enables you to install 2x PCIe M.2 SSDs (NVMe or AHCI) into a computer through an available x8/x16 PCI Express 4.0 slot | Read and write speeds up to 7.8GBps per drive – PCIe Bifurcation support is required by the Computer/Motherboard | Compatible with PCIe 3.0 x8 or x16 slots | Windows/Linux – Access the M.2 PCIe SSDs individually | Software RAID support for RAID 0/RAID 1/JBOD – Vented full-profile bracket pre-installed and low-profile bracket included
SKU: DUAL-M2-PCIE-CARD-B -
StarTech.com Controllers
PEXUSB312A3 StarTech.com 2-Port PCI Express 3.0 Host Controller
PEXUSB312A3 Overview
The USB 3.2 Gen 2 card features an ASMedia ASM3142 host controller that utilizes x2 lanes of the PCIe 3.0 bus, making the card capable of speeds up to 10Gbps on each port, and enabling fast access to high-performance devices like NVMe drives and SSDs. The controller card supports Multiple INs to reduce bandwidth loss when multiple devices are connected, even when connected through a USB Hub (Note: The USB hub must also support this feature). The card also supports UASP for improved performance with storage devices.
SKU: PEXUSB312A3 -
StarTech.com Controllers
PEXUSB312A2C2V StarTech.com 4-Port USB PCIe Card Controllers
PEXUSB312A2C2V Overview
This 4-port USB 3.2 Gen 2×1 (10Gbps) combo card makes it easy to add to the performance and connectivity of your computer. The USB 3.2 card offers two USB Type-C™ port (10Gbps), and two traditional USB Type-A ports (10Gbps).
SKU: PEXUSB312A2C2V -
StarTech.com Controllers
PEXUSB311A1E StarTech.com 2 Port USB 3.1 (10Gbps) + eSATA PCIe
PEXUSB311A1E Overview
This combination PCI Express controller card lets you add both a USB 3.2 Gen 2 port and an eSATA port to your desktop PC, through a single PCIe slot. The versatile controller card offers a cost-effective way to add high-performance connectivity to your computer, with support for newer USB 3.2 devices as well as eSATA hard drives.
SKU: PEXUSB311A1E -
StarTech.com Controllers
PEXUSB3S44V StarTech.com 4 Port USB 3.0 PCIe Card w/ 4 Dedicated
PEXUSB3S44V Overview
Add four USB 3.0 ports with four independent channels, LP/SATA power, and charging support to your PC through a PCI Express slot. The PEXUSB3S44V 4-Port PCI Express USB 3.0 Card lets you add four, dedicated 5 Gbps USB 3.0 ports to your PCIe x4-enabled PC. This independent port architecture improves USB 3.0 performance by transferring data on four individual channels to your computer, giving you faster file transfers.
SKU: PEXUSB3S44V -
StarTech.com Controllers
PEXUSB311AC3 StarTech.com 2-port PCI Express Expansion Add-On Card
PEXUSB311AC3 Overview
This USB 3.2 Gen 2 card lets you add one USB-C port and one USB-A port to your computer, through a PCI Express slot. It enables you to upgrade your current system by adding two USB 3.2 Gen 2 ports to your computer and giving you access to data transfer speeds up to 10Gbps per port. USB 3.2 Gen 2 (also known as USB 3.1) PCIe Add-On card supports Multiple INs, maintains optimal bandwidth even when mixed speed devices are connected.
SKU: PEXUSB311AC3
