Expansion Modules
Showing 1301–1325 of 1393 resultsSorted by popularity
-
-
Juniper Expansion Modules
BT8A78SFP12G Juniper Networks BTI Interface Card expansion module
BT8A78SFP12G Overview
BTI Interface Cards (BICs) are modules that hold pluggable transceivers. The transceivers are plugged into the BICs, which in turn are inserted into the UFMs. A BIC can be installed into a UFM3 or a UFM4.
SKU: BT8A78SFP12G -
-
Juniper Expansion Modules
BT7D22AA-I02 Juniper BTI SA-822 Ethernet Aggregation Device
BT7D22AA-I02 Overview
The Juniper Networks BTI SA-822 Ethernet Aggregation Device provides high-capacity Ethernet services aggregation and transport for metro networks in a compact 1U form factor. This multiservice platform also delivers high performance and reliability for Carrier Ethernet business services and mobile backhaul applications. It features 12 x GbE/10 GbE SFP+ ports and supports a data transfer speed of 120 Gb/s. For enhanced usage, this device is fully integrated with the Juniper Networks proNX software.
SKU: BT7D22AA-I02 -
Juniper Expansion Modules
MPC2E-3D-NG-Q Juniper Networks expansion module
MPC2E-3D-NG-Q Overview
The NG-MPC2 uses the latest programmable Junos Trio chipset, which features an upgraded CPU and increased memory to provide powerful routing, switching, and services capabilities, including line-rate forwarding, hierarchical quality of service (QoS), integrated video quality assurance, flow monitoring, load balancing, and Network Address Translation (NAT). Both modules support a complete set of Juniper Networks Junos operating system-based Layer 2, Layer 2.5, and Layer 3 features, and both host two Modular Interface Cards (MICs) for flexible high-density Ethernet and time-division multiplexing (TDM) network connectivity.
SKU: MPC2E-3D-NG-Q -
Juniper Expansion Modules
MX10003-LC2103-R Juniper Networks MX Series expansion module
MX10003-LC2103-R Overview
Modular Port Concentrators (MPCs) are a set of next-generation advanced line modules for Juniper Networks MX Series 3D Universal Edge Routers that deliver the performance, services, and scalability that are critical to today’s advanced Ethernet services edge and broadband edge networks. Designed for flexibility, MPCs introduce both the industry’s highest capacity and modular 1GbE and 10GbE hardware to the MX Series portfolio, allowing customers to flexibly mix and match interfaces to create service-specific and “pay as you grow” configurations. The MPC houses the packet forwarding engines that deliver up to 120 Gbps of comprehensive Layer 3 routing (IPv4 and IPv6), Layer 2 switching, inline services, and advanced hierarchical quality of service (H-QoS) per MX Series slot.
SKU: MX10003-LC2103-R -
-
Juniper Expansion Modules
CTP151-AC Juniper Networks CTP151 modular expansion base
CTP151-AC Overview
Juniper Networks CTP Series Circuit to Packet Platforms provide the advanced technology and features required to reliably transport time-division multiplexing and other circuit-based applications across next-generation IP/MPLS networks. The CTP Series has the field-proven flexibility, performance and reliability required for circuit applicationsSKU: CTP151-AC -
Juniper Expansion Modules
EX9200-15C Juniper Networks expansion module
EX9200-15C Overview
Fixed-configuration line card with 15 rate-selectable ports. All ports can operate at 10-Gbps, 25-Gbps, 40-Gbps, or 100-Gbps speeds. The ports are configured to operate at 100-Gbps speed by default.SKU: EX9200-15C -
Juniper Expansion Modules
NS-ISG-SX2 Juniper Networks SFP Expansion Module
NS-ISG-SX2 Overview
The Juniper Networks Integrated Security Gateways (ISG) are purpose-built security solutions that leverage a fourth generation security ASIC, the GigaScreen, along with high speed microprocessors to deliver unmatched firewall and VPN performance. The Juniper Networks ISG 2000 is ideally suited for securing enterprise, carrier and data center environments where advanced applications such as VoIP and streaming media dictate consistent, scalable performance. Integrating best-in-class Deep Inspection firewall, VPN and Dos solutions, the ISG 2000 enables secure, reliable connectivity along with network and application-level protection for critical, high-traffic network segments.SKU: NS-ISG-SX2 -
Juniper Expansion Modules
JX-2E1-RJ48-S Juniper Networks Dual-port E1 Physical Interface Modules
JX-2E1-RJ48-S Overview
The Juniper Dual-port E1 PIM provides the physical connection to E1 network media type, receiving incoming packets from the network and transmitting outgoing packets to the network. The Juniper Dual-port E1 PIM is equipped with a dedicated network processor that forwards incoming data packets to the Routing Engine, and receives outgoing data packets from the Routing Engine. During this process, the PIM performs E1 framing and line-speed signaling.SKU: JX-2E1-RJ48-S -
-
Cisco Expansion Modules
SM-X-4X1G-1X10G Cisco 4-Port High-Density Gigabit
SM-X-4X1G-1X10G Overview
Cisco Gigabit Ethernet WAN Modules bring high-density Small Form-Factor Pluggable (SFP) and copper (RJ-45) 1 Gigabit and 10 Gigabit Ethernet (GE) connectivity to the Cisco 4000 Series Integrated Services Routers (ISRs). Providing maximum flexibility, the modules accelerate applications such as Ethernet WAN access, inter-VLAN routing, and high-speed connectivity to LAN switches and servers
SKU: SM-X-4X1G-1X10G -
Cisco Expansion Modules
NIM-2GE-CU-SFP Cisco Network Interface Module
NIM-2GE-CU-SFP Overview
Main Features
Expansion module
combo Gigabit SFP x 2
for Cisco 4451-X
Boost the functionality of your Cisco systems with the Cisco Expansion Module. This network interface module is a plug-in module that follows the Gigabit Ethernet data link protocol. It features two 1000Base-X RJ-45 connectors and two Combo Gigabit SFP ports. This module works with the Cisco 4451-X router.SKU: NIM-2GE-CU-SFP
