Cisco Modules
Cisco Modules
Showing 1–25 of 227 resultsSorted by popularity
-
Cisco Modules
C9200-STACK-KIT Cisco 9200 Network Stacking Module
C9200-STACK-KIT Overview
Cisco Catalyst 9200 Series switch models are designed for stacking switches as a single virtual switch, enabling customers to have a single management plane and control plane for up to 384 access ports. This StackWise-160 kit consists of two adapters and a stacking cable.
SKU: C9200-STACK-KIT -
-
Cisco Modules, Modules
7600-ES20-GE3CXL Cisco 20-Ports SFP 20Gbps Ethernet Services Line Card
7600-ES20-GE3CXL Overview
The Cisco is a high-capacity Ethernet Services line card designed for the Cisco 7600 Series modular chassis switches. It provides 20 SFP-based Gigabit Ethernet ports, delivering an aggregate throughput of 20Gbps while supporting advanced Layer 2 and Layer 3 services. Built with the DFC3CXL (Distributed Forwarding Card), this module offers high-scale forwarding performance, enabling large routing tables and enhanced scalability for service provider and enterprise deployments.
SKU: 7600-ES20-GE3CXL -
Cisco Modules
GRWIC-D-ES-6S Cisco 4-Ports SFP 100Base-FX Switching Module
GRWIC-D-ES-6S Overview
Cisco 4-Ports SFP 100Base-FX Switching ModuleThe Cisco Ethernet Switch Module (ESM) for the Cisco Connected Grid Router (CGR 2010) can reduce your total cost of ownership by integrating Gigabit Ethernet (GE) and Fast Ethernet (FE) switch ports. This integration allows you to build redundant high-availability architectures and provides an all-in-one device to deliver advanced routing and switching, valuable for space-constrained environments
SKU: GRWIC-D-ES-6S -
Cisco Modules
A900-IMA8D Cisco ASR 900 8 port RJ48C T1/E1 Interface Module
A900-IMA8D Overview
Cisco ASR 900 8 port RJ48C T1/E1 Interface Module Cisco ASR 900 series Ethernet interface modules are designed to give customers a high degree of flexibility and value. All Ethernet interface modules share a common core that supports time stamping on the module for Y.1731 operations, administration
SKU: A900-IMA8D -
Cisco Modules
C9200-STACK Cisco Catalyst 9200 Series Stack Module 480GBPS
C9200-STACK Overview
Cisco Catalyst 9200 Series Stack Module 480GBPS. This Cisco is a Stack Module that empowers these switches with Power Over Ethernet (PoE) capabilities, offering support for up to 715 watts of power. They are designed to meet the growing demands of modern organizations for reliable and efficient network operations. Cisco Catalyst 9200 Series Switches come in various models, each catering to specific networking needs. They are widely used in enterprises, educational institutions, government organizations, and small to medium-sized businesses.
SKU: C9200-STACK -
Cisco Modules
NM-HDV2-1T1/E1 Cisco Digital Voice/Fax Network Module
NM-HDV2-1T1/E1 Overview
Cisco Digital Voice/Fax Network Module. This Cisco Digital Voice/Fax Network Module is a high-quality, feature-rich network module that offers a range of benefits for organizations looking to improve their communication and collaboration infrastructure. This is includes a built-in T1/E1 port and a VIC/VWIC slot that can be fitted with either digital or analog/BRI voice/WAN interface cards. Supports a maximum of 90 channels of digital voice, or 30 channels of digital voice and four channels of analog voice in medium complexity codec.
SKU: NM-HDV2-1T1/E1 -
Cisco Modules
FPR4K-NM-8X10G Cisco FirePOWER network adapter 10 Gigabit SFP+ x 8
FPR4K-NM-8X10G Overview
Cisco FirePOWER network adapter 10 Gigabit SFP+ x 8. The Cisco FirePower 8 port SFP+ Network Module is a Cisco expansion module plug-in module form factor for Cisco networks that enables uplink ports connection with 10 Gigabit Ethernet data link protocol, 10 Gbps of data transfer rate, and 8 x 10GBase-SX – SFP+ network interface.
SKU: FPR4K-NM-8X10G -
Cisco Modules
VWIC3-2MFT-T1/E1 Cisco 2 Ports WAN Interface Card
VWIC3-2MFT-T1/E1 Overview
Cisco 2 Ports WAN Interface Card. The Cisco is a powerful and versatile 2-port interface card designed to meet the demands of modern communication networks. Specifically engineered for voice and Wide Area Network (WAN) applications, this multiflex trunk card provides seamless connectivity and high-performance features. Its efficient data transfer rates, scalability, and easy installation make it a valuable asset for those looking to enhance their communication infrastructure
SKU: VWIC3-2MFT-T1/E1 -
Cisco Modules
WS-X4515 Cisco Catalyst 4500 Series Supervisor Engine
WS-X4515 Overview
Cisco Catalyst 4500 Series Supervisor Engine. This is a Supervisor Engine for the Cisco Catalyst 4500 Series. It is responsible for managing and directing traffic, as well as providing a variety of network services. Performance and reliability are key considerations when evaluating this Supervisor Engine, as they directly impact the overall network performance and uptime.
SKU: WS-X4515 -
Cisco Modules
WS-X4013+10GE Cisco Supervisor Engine II-Plus-10GBPS Control
WS-X4013+10GE Overview
Cisco Supervisor Engine II Plus-10GBPS Control. This Cisco Supervisor Engine II-Plus-10GBPS Control Processor is a high-performance networking device that provides advanced switching capabilities for the Cisco Catalyst 4500 Series Switches. The Supervisor Engine II-Plus-10GBPS Control Processor is designed to deliver high-speed connectivity and network resiliency to help meet the demands of modern enterprise networks.
SKU: WS-X4013+10GE -
Cisco Modules
WS-SVC-CMM-6T1 Cisco Catalyst 6500 Series Voice Interface Card Plug In Module
WS-SVC-CMM-6T1 Overview
Cisco Catalyst 6500 Series Voice Interface Card Plug In Module. This Cisco 6 Ports Voice Module is a network module that provides voice connectivity and services to Cisco switches. The module requires specific hardware and software requirements to operate correctly. This module has a maximum operating temperature of 40°C, and the ambient temperature should not exceed 45°C. Make sure that the module is installed in a well-ventilated area, and that there is proper air flow around the module.
SKU: WS-SVC-CMM-6T1 -
Cisco Modules
WIC-1B-U-V2= Cisco 1 x Port ISDN/BRI Version 2 WAN Interface Card
WIC-1B-U-V2= Overview
Cisco 1 x Port ISDN/BRI Version 2 WAN Interface Card. This Cisco 1-Port WAN Interface Card (WIC) is a small, hot-swappable network interface module that can be installed into a Cisco router to provide connectivity to wide area networks (WANs). It supports a variety of WAN technologies and can be used in a wide range of applications.
SKU: WIC-1B-U-V2= -
Cisco Modules
WS-F6700-DFC3CXL Cisco Distributed Forwarding Card 3CXL Switching accelerator
WS-F6700-DFC3CXL Overview
Cisco Distributed Forwarding Card 3CXL Switching accelerator. This is a distributed forwarding card (DFC) for the Cisco Catalyst 6500 series switches. It is designed to provide high-performance forwarding for high-speed Ethernet, MPLS, and IPv6 traffic, making it ideal for use in large enterprise networks, service provider networks, and data centers
SKU: WS-F6700-DFC3CXL -
Cisco Modules
WS-F6700-DFC3C Cisco Distributed Forwarding Card 3C Switching accelerator
WS-F6700-DFC3C Overview
Cisco Distributed Forwarding Card 3C Switching accelerator. This Cisco Catalyst 6500 Distributed Forwarding Card (DFC) is a crucial component designed to enhance the performance and capabilities of the Cisco Catalyst 6500 Series Switches, specifically when used in conjunction with the WS-X67xx Wide Area Network (WAN) Expansion Module. These expansion modules empower the Catalyst 6500 switches to extend their reach and functionality, providing a comprehensive solution for organizations with geographically dispersed network assets.
SKU: WS-F6700-DFC3C -
Cisco Modules
WS-F6700-DFC3BXL Cisco Distributed Forwarding Card 3BXL Switching accelerator
WS-F6700-DFC3BXL Overview
Cisco Distributed Forwarding Card 3BXL Switching accelerator. The Catalyst 6500 Distributed Forwarding Card-3 is installed in DFC-enabled line-card modules that perform distributed forwarding supported by the Catalyst 6500 Supervisor Engine 720 as a field upgrade. This Cisco Catalyst 6500 Distributed Forwarding Card (DFC) is a high-performance forwarding and routing card for Cisco Catalyst 6500 Series Switches. It provides a range of fabric extender software components to help manage and extend the capabilities of the switch fabric.
SKU: WS-F6700-DFC3BXL -
Cisco Modules
WS-F6700-DFC3B Cisco Distributed Forwarding Card 3B Switching accelerator
WS-F6700-DFC3B Overview
Cisco Distributed Forwarding Card 3B Switching accelerator. This Cisco 1-port T1/FT1 CSU/DSU WAN Interface Card is a networking component that provides connectivity between a Cisco router and a T1 or fractional T1 (FT1) leased line. This Cisco 1-port T1/FT1 CSU/DSU WAN Interface Card provides scalability and expansion options for growing network needs.
SKU: WS-F6700-DFC3B -
Cisco Modules
WIC-1B-U-V2 Cisco 1 x Port ISDN/BRI Version 2 WAN Interface Card
WIC-1B-U-V2 Overview
Cisco 1 x Port ISDN/BRI Version 2 WAN Interface Card. This Cisco 1-Port WAN Interface Card (WIC) is a small, hot-swappable network interface module that can be installed into a Cisco router to provide connectivity to wide area networks (WANs). It supports a variety of WAN technologies and can be used in a wide range of applications.
SKU: WIC-1B-U-V2 -
Cisco Modules
NM-1FE1R2W Cisco 1 Port 10/100 Ethernet NM Card Network Module
NM-1FE1R2W Overview
Cisco 1 Port 10/100 Ethernet NM Card Network Module. This is a network module for Cisco routers that provides a combination of Ethernet, Token-Ring, and WAN connectivity. Specifically, it includes one 10/100 Ethernet port, four or sixteen Token-Ring ports (depending on the version), and two WAN card slots.
SKU: NM-1FE1R2W -
Cisco Modules
NIM-VAB-M Cisco 1-port VDSL2/ADSL2+ over POTS with Annex M DSL modem
NIM-VAB-M Overview
Cisco 1-port VDSL2/ADSL2+ over POTS with Annex M DSL modem. This Cisco 1 Port WAN Access Module provides network connectivity for Cisco Integrated Services Routers (ISR) and offers several management and monitoring features to help administrators ensure optimal performance and reliability of the network. This capability enables service providers and resellers to offer additional services such as business-class security; voice, video, and data; differentiated classes of service and managed network access over existing telephony infrastructure. These value-added features provide the mission-critical networking features that businesses expect.
SKU: NIM-VAB-M -
Cisco Modules
NIM-VA-B Cisco 1-port VDSL2/ADSL2+ over ISDN with Annex B/J DSL modem
NIM-VA-B Overview
This Cisco WAN Access DSL modem supports various DSL technologies, such as ADSL, ADSL2, ADSL2+, and VDSL2, which can provide data transfer rates of up to several megabits per second (Mbps) or even gigabits per second (Gbps) in some cases. This allows network users to download and upload large files, stream high-quality videos, play online games, and engage in other bandwidth-intensive activities with minimal latency or lag.
SKU: NIM-VA-B
