Data Multiplexer
Data Multiplexer
Showing 1–25 of 26 resultsSorted by popularity
-
Cisco Refurbished Expansion Modules
Refurbished 15454-MRC-I-12 Cisco Multirate optics card multiplexor
Cisco Refurbished Expansion ModulesRefurbished 15454-MRC-I-12 Cisco Multirate optics card multiplexor
Refurbished 15454-MRC-I-12 Overview
The Cisco ONS 15454 12-Port SFP-Based Multirate Optics Card supports multiple Small Form-Factor Pluggable (SFP) modules, helping enable multirate SONET/SDH and multiple-reach capabilities. The MRC-12 card operates in either Cisco ONS 15454 SONET or SDH systems, supporting optical line rates including OC-3/STM-1, OC-12/STM-4, and OC-48/STM-16 and optical reaches from short-reach/interoffice to long-reach/long-haul, including dense wavelength-division multiplexing (DWDM) and coarse wavelength-division multiplexing (CWDM).
SKU: 15454-MRC-I-12-RF -
Cisco Refurbished Expansion Modules
Refurbished 15454-GE-XPE Cisco Systems 20 Gigabit CrossPonder Card
Cisco Refurbished Expansion ModulesRefurbished 15454-GE-XPE Cisco Systems 20 Gigabit CrossPonder Card
Refurbished 15454-GE-XPE Overview
This Cisco 15454-GE-XPE 20 Gigabit Ethernet Enhanced CrossPonder Card Muxponder is in refurbished condition and is fully guaranteed by our 90-day warranty. Please feel free to contact us regarding our inventory of refurbished Cisco networking equipment, or if you have any additional questions regarding this 15454-GE-XPE 20 Gigabit Ethernet Enhanced CrossPonder Card Muxponder.
SKU: 15454-GE-XPE-RF -
-
Cisco Refurbished Expansion Modules
Refurbished 15454-AR-MXP Cisco Muxponder Card
Refurbished 15454-AR-MXP Overview
Metro transport networks must support numerous service demands: transmission of low-rate 10/100BASE-T and OC-3/STM-1 signals; higher-rate OC-12/STM-4, Gigabit Ethernet, OC-48/STM-16 signals; video signals such as standard-definition Serial Data Input (SDI) and high-definition SDI (HD-SDI); optical-transport-unit-1 (OTU-1) services; and first-generation (1G), 2G, 4G, and 8G Fibre Channel services. The flexibility to support multiple rates and aggregate them over a dense wavelength-division multiplexing (DWDM) interface using OTN technology brings huge savings in operating and management costs.
SKU: 15454-AR-MXP-RF -
Cisco Refurbished Expansion Modules
Refurbished 15454-40-SMR2-C Cisco Single Module ROADM multiplexer
Cisco Refurbished Expansion ModulesRefurbished 15454-40-SMR2-C Cisco Single Module ROADM multiplexer
Refurbished 15454-40-SMR2-C Overview
Cisco NCS 2000 Flex Spectrum Single Module ROADM line cards create an agile DWDM layer forming the foundation for converged transport architectures, delivering features that allow programmability and agility in provisioning and recovery operations. Wavelength add/drop and routing are entirely software-driven, which eliminates manual operations, helps decrease operating expenses (OpEx), and reduces provisioning and recovery times.
SKU: 15454-40-SMR2-C-RF -
-
Juniper Modules
BP1A35AA Juniper 32 Channel DWDM MUX/Demux 8 Channel Module
BP1A35AA Overview
The Juniper Networks DWDM data Multiplexer/Demultiplexer (Mux/Demux) provides a simple method to increase the amount of data sent over the network. This 32-channel appliance transmits signals over optical fiber, enabling users to multiplex or demultiplex multiple wavelengths. Compatible with the Juniper Networks BTI7000 Series packet optical transport system.
SKU: BP1A35AA -
Juniper Modules, Juniper Accessories
BP1A33BAÂ Juniper 4-Channel CWDM Multiplexer/Demultiplexer
BP1A33BA Overview
The Juniper Multiplexer/Demultiplexer provides a simple method to maximize existing fiber capacities. This four-channel appliance features a CWDM circulator, allowing users to multiplex or demultiplex multiple wavelengths over one fiber.
SKU: BP1A33BA -
Juniper Routers
TCX1000-RDM20-DC Juniper TCX1000 20 Port DC ROADM System
TCX1000-RDM20-DC Overview
The Juniper TCX1000 ROADM Power Supply is a hot-removable and hot-insertable field-replaceable unit (FRU) that can be installed without powering off the TCX1000-RDM20 or disrupting its functioning.
SKU: TCX1000-RDM20-DC -
Juniper Network Switches
TCX1000-RDM20-CHAS Juniper TCX1000 20 Port ROADM Chassis
TCX1000-RDM20-CHAS Overview
The Juniper ROADM Chassis CX1000-RDM20 is a standalone 20-port reconfigurable optical add/drop multiplexer (ROADM) with removable AC or DC power supplies and cooling fans. The flexible-grid ready TCX1000 provides long-term investment protection for customers, and supports a diverse range of packet optical network use cases.
SKU: TCX1000-RDM20-CHAS -
Cisco Modules
15216-FLD-4-42.9 Cisco ONS 15216 4-Channel Optical Multiplexer
15216-FLD-4-42.9 Overview
The Cisco ONS 15216 4 Channel Optical Add/Drop Multiplexers (OADMs) are a set of passive OADMs that allow the Cisco ONS 15454 Multiservice Transport Platform (MSTP) to address the edge of the optical network in a costeffective manner without sacrificing operational ease of use
SKU: 15216-FLD-4-42.9 -
Cisco Modules
15216-FLD-4-30.3 Cisco ONS 15216 4-Channel Optical Multiplexer
15216-FLD-4-30.3 Overview
The Cisco ONS 15216 4 Channel Optical Add/Drop Multiplexers (OADMs) are a set of passive OADMs that allow the Cisco ONS 15454 Multiservice Transport Platform (MSTP) to address the edge of the optical network in a cost effective manner without sacrificing operational ease of use.
SKU: 15216-FLD-4-30.3 -
Cisco Modules
15216-FLD-4-49.3 Cisco ONS 15216 4-Channel Optical Multiplexer
15216-FLD-4-49.3 Overview
The Cisco ONS 15216 4 Channel Optical Add/Drop Multiplexers (OADMs) are a set of passive OADMs that allow the Cisco ONS 15454 Multiservice Transport Platform (MSTP) to address the edge of the optical network in a cost-effective manner without sacrificing operational ease of use
SKU: 15216-FLD-4-49.3 -
Cisco Transceivers
15216-FLD-4-33.4 Cisco ONS 15216 4 Channel Optical Multiplexer
15216-FLD-4-33.4 Overview
The Cisco ONS 15216 4 Channel Optical Add/Drop Multiplexers (OADMs) are a set of passive OADMs that allow the Cisco ONS 15454 Multiservice Transport Platform (MSTP) to address the edge of the optical network in a cost-effective manner without sacrificing operational ease of use. The Cisco ONS 15216 4 Channel OADMs are well suited to applications with minimal wavelength requirements and tight space and power constraints, such as cell site and customer premises terminations. Ten models are available, covering a 40-channel 100-GHz channel plan.SKU: 15216-FLD-4-33.4 -
Cisco Transceivers
15216-FLD-4-36.6 Cisco ONS 15216 4-Channel Add/Drop Multiplexer
15216-FLD-4-36.6 Overview
The Cisco ONS 15216 4 Channel Optical Add/Drop Multiplexers (OADMs) are a set of passive OADMs that allow the Cisco ONS 15454 Multiservice Transport Platform (MSTP) to address the edge of the optical network in a cost-effective manner without sacrificing operational ease of use. The Cisco ONS 15216 4 Channel OADMs are well suited to applications with minimal wavelength requirements and tight space and power constraints, such as cell site and customer premises terminations. Ten models are available, covering a 40-channel 100-GHz channel plan.
SKU: 15216-FLD-4-36.6 -
Cisco Modules
15216-FLD-4-39.7 Cisco ONS 15216 4-Channel OADM
15216-FLD-4-39.7 Overview
The Cisco ONS 15216 4 Channel Optical Add/Drop Multiplexers (OADMs) are a set of passive OADMs that allow the Cisco ONS 15454 Multiservice Transport Platform (MSTP) to address the edge of the optical network in a cost-effective manner without sacrificing operational ease of use
SKU: Â 15216-FLD-4-39.7 -
Cisco Modules
15216-FLD-4-46.1 Cisco Systems Edge 4-CH BI-Directional OADM
15216-FLD-4-46.1 Overview
The Cisco ONS 15216 4 Channel Optical Add/Drop Multiplexers (OADMs) are a set of passive OADMs that allow the Cisco ONS 15454 Multiservice Transport Platform (MSTP) to address the edge of the optical network in a cost-effective manner without sacrificing operational ease of use
SKU: 15216-FLD-4-46.1 -
Cisco Modules
CWDM-MUX8A Cisco 8-channels CWDM MUX/DEMUX Module
CWDM-MUX8A Overview
The 8-Channel Multiplexer/Demultiplexer (CWDM-MUX-8A) allows you to multiplex/demultiplex eight separate channels into one pair of fiber. Dual fiber is used for both the network connection and the CWDM GBIC or CWDM SFP transceiver connections. The eight available wavelengths are 1470-nm, 1490-nm, 1510-nm, 1530-nm, 1550-nm, 1570-nm, 1590-nm, and 1610-nm. The multiplexer/demultiplexer, is equipped with a monitor port that allows you to attach a power meter or an optical spectrum analyzer to assist you in monitoring and troubleshooting the network
SKU: cwdm-mux8a -
Cisco Modules
CWDM-MUX-4-SF1, Single Fiber 4-Channel Mux/Demux
CWDM-MUX-4-SF1 Overview
The Cisco CWDM passive optical system provides optical networking support for high-speed data communication for metropolitan area networks (MANs) over a grid of eight CWDM optical wavelengths in both ring or point-to-point configurations. The Single-Fiber 4-Channel Multiplexer/Demultiplexer allows you to multiplex/demultiplex four separate channels into one strand of fiber. Dual fiber is used for the connections to the GBICs and single fiber is used for the network connections
SKU: CWDM-MUX-4-SF1






















