Interface Card
Showing 1–25 of 51 resultsSorted by popularity
-
Cisco Network Switches, Network Switches
HWIC-4ESW-POE Cisco Ethernet Switch High Speed WAN Interface Card
Cisco Network Switches, Network SwitchesHWIC-4ESW-POE Cisco Ethernet Switch High Speed WAN Interface Card
HWIC-4ESW-POE Overview
The Cisco HWIC-4ESW-POE is a versatile high-speed WAN interface card that adds four managed Fast Ethernet ports with Power over Ethernet support to Cisco 1800, 2800, and 3800 Series Integrated Services Routers. This module combines LAN switching and PoE capability in a single expansion card, enabling branch offices and small networks to power IP phones, wireless access points, and security cameras directly without requiring an external PoE switch. It supports Layer 2 switching with VLANs, QoS features, and port-based security, ensuring optimized traffic handling and secure connectivity. Integrated with Cisco IOS software, it provides seamless management and consistent policy enforcement across both routing and switching environments.
SKU: HWIC-4ESW-POE -
Cisco Network Switches
NIM-2T= Cisco 2-Port Serial WAN Network Interface Card
NIM-2T= Overview
Cisco 2-Port Serial WAN Network Interface Card.The Cisco WAN Network Interface Module offers reliable and effective WAN connections for remote sites. This 2-port Serial WAN Interface Card, in a plug-in form factor, provides a data transfer rate of 8 Mb/s through a wired connection. It features a 12-in-1 connector and supports V.35, RS232, X.21, RS449, RS530 and RS530A interfaces for convenient and flexible usage. This Cisco serial adapter adheres to multiple compliant safety standards for secure usage.
SKU: NIM-2T= -
Cisco Expansion Modules
WIC-1DSU-T1 Cisco 1-port T1/FT1 CSU/DSU WAN Interface Card
WIC-1DSU-T1 Overview
Cisco 1-port T1/FT1 CSU/DSU WAN Interface Card. This Cisco 1-port T1/FT1 CSU/DSU WAN Interface Card includes high availability (HA) and redundancy features to ensure maximum uptime and availability of critical WAN connections. This includes two RJ-48 ports, allowing for redundant connections to the WAN. This means that if one port fails or goes down, the other port can take over to maintain connectivity. HSRP is a Cisco proprietary protocol that provides redundancy for IP networks. The WIC-1DSU-T1 can be configured to work with HSRP, allowing for automatic failover to a backup router in the event of a primary router failure.
SKU: WIC-1DSU-T1 -
Cisco Expansion Modules
WIC-1B-S/T-V3 Cisco Single Port WAN Interface Card
WIC-1B-S/T-V3 Overview
Cisco Single Port WAN Interface Card. The is a single port WAN Interface Card (WIC) manufactured by Cisco that supports Point-to-Point Protocol (PPP). PPP is a data link protocol that provides a secure and reliable connection between two network devices over a serial interface. It is widely used in WAN connections because it provides several advantages over other protocols. This provides data transfer rates of up to 8 Mbps synchronous and 16 Mbps asynchronous, which is higher than the WIC-1B-S/T. This means that the WIC-1B-S/T-V3 can handle more data traffic, resulting in improved network performance.
SKU: WIC-1B-S/T-V3 -
Dell Expansion Module
T8FY5 Dell 10GBE 2 Ports Mezzanine Card for Poweredge C6320
T8FY5 Overview
Dell 10GBE 2 Ports Mezzanine Card for Poweredge C6320. This Dell 10GBE 2 Ports Mezzanine Card is a high-performance network interface card designed to provide high-speed connectivity to Dell PowerEdge servers. It is a small form factor card that is designed to fit into the mezzanine slot of the server’s motherboard. This Dell 10GBE 2 Ports Mezzanine Card is a dual-port card that provides 10 Gigabit Ethernet (10GbE) connectivity to servers. The card is designed to support high-bandwidth applications such as video streaming, large file transfers, and data center applications. It supports both full-duplex and half-duplex modes of operation, allowing for maximum flexibility in network deployment.
SKU: T8FY5 -
Cisco Expansion Modules
ASA-IC-6GE-SFP-C= Cisco ASA Interface Card Expansion module 6 ports
ASA-IC-6GE-SFP-C= Overview
Cisco ASA Interface Card Expansion module 6 ports. Cisco Interface Cards ASA 5545-X/5555-X Intf. Card 6-port GE SFP (SX,LH,LX) Spare Interface Cards for Cisco.
SKU: ASA-IC-6GE-SFP-C= -
Cisco Expansion Modules
HWIC-1DSU-T1 Cisco Wan Interface Card Ethernet One-Port
HWIC-1DSU-T1 Overview
Cisco Wan Interface Card Ethernet One-Port. This Cisco belongs to the High-Speed WAN Interface Card (HWIC) family, designed to enhance the capabilities of Cisco routers. This particular modele focuses on Wide Area Network (WAN) connectivity and Ethernet integration. This is especially crucial for businesses and organizations requiring reliable and high-speed connections over large geographical distances. The T1 designation indicates compatibility with T1 lines, a common digital communication method.
SKU: HWIC-1DSU-T1 -
Cisco Modules
VWIC3-2MFT-T1/E1 Cisco 2 Ports WAN Interface Card
VWIC3-2MFT-T1/E1 Overview
Cisco 2 Ports WAN Interface Card. The Cisco is a powerful and versatile 2-port interface card designed to meet the demands of modern communication networks. Specifically engineered for voice and Wide Area Network (WAN) applications, this multiflex trunk card provides seamless connectivity and high-performance features. Its efficient data transfer rates, scalability, and easy installation make it a valuable asset for those looking to enhance their communication infrastructure
SKU: VWIC3-2MFT-T1/E1 -
Cisco Expansion Modules
VWIC3-4MFT-T1/E1 Cisco Multiflex Network Module Trunk WAN
VWIC3-4MFT-T1/E1 Overview
Cisco Multiflex Network Module Trunk WAN. This Cisco is a third-generation WAN Interface Card designed to enhance the capabilities of networking devices. Specifically, this module is equipped with four ports, each supporting T1 or E1 interfaces. The integration of multiple ports enables versatile connectivity options, making it a valuable component for organizations with diverse networking requirements.
SKU: VWIC3-4MFT-T1/E1 -
Cisco Modules
WS-SVC-CMM-6T1 Cisco Catalyst 6500 Series Voice Interface Card Plug In Module
WS-SVC-CMM-6T1 Overview
Cisco Catalyst 6500 Series Voice Interface Card Plug In Module. This Cisco 6 Ports Voice Module is a network module that provides voice connectivity and services to Cisco switches. The module requires specific hardware and software requirements to operate correctly. This module has a maximum operating temperature of 40°C, and the ambient temperature should not exceed 45°C. Make sure that the module is installed in a well-ventilated area, and that there is proper air flow around the module.
SKU: WS-SVC-CMM-6T1 -
Cisco Modules
WIC-1B-U-V2= Cisco 1 x Port ISDN/BRI Version 2 WAN Interface Card
WIC-1B-U-V2= Overview
Cisco 1 x Port ISDN/BRI Version 2 WAN Interface Card. This Cisco 1-Port WAN Interface Card (WIC) is a small, hot-swappable network interface module that can be installed into a Cisco router to provide connectivity to wide area networks (WANs). It supports a variety of WAN technologies and can be used in a wide range of applications.
SKU: WIC-1B-U-V2= -
Cisco Modules
WS-F6700-DFC3B Cisco Distributed Forwarding Card 3B Switching accelerator
WS-F6700-DFC3B Overview
Cisco Distributed Forwarding Card 3B Switching accelerator. This Cisco 1-port T1/FT1 CSU/DSU WAN Interface Card is a networking component that provides connectivity between a Cisco router and a T1 or fractional T1 (FT1) leased line. This Cisco 1-port T1/FT1 CSU/DSU WAN Interface Card provides scalability and expansion options for growing network needs.
SKU: WS-F6700-DFC3B -
Cisco Modules
WIC-1B-U-V2 Cisco 1 x Port ISDN/BRI Version 2 WAN Interface Card
WIC-1B-U-V2 Overview
Cisco 1 x Port ISDN/BRI Version 2 WAN Interface Card. This Cisco 1-Port WAN Interface Card (WIC) is a small, hot-swappable network interface module that can be installed into a Cisco router to provide connectivity to wide area networks (WANs). It supports a variety of WAN technologies and can be used in a wide range of applications.
SKU: WIC-1B-U-V2 -
Cisco Expansion Modules
WIC-1B-S/T Cisco V3 Single Port ISDN WAN Interface Module Card
WIC-1B-S/T Overview
Cisco V3 Single Port ISDN WAN Interface Module Card. This Cisco 1-Port WAN Interface Card is a type of interface card used to connect WAN devices to Cisco routers. Like any other networking device, This Cisco 1-Port WAN Interface Card can encounter common issues that need to be resolved. It can support data transfer rates of up to 1.544 Mbps for T1 lines and 2.048 Mbps for E1 lines. It also supports various line coding schemes and framing formats used by different WAN technologies.
SKU: WIC-1B-S/T -
Cisco Expansion Modules
VWIC3-2MFT-G703 Cisco Trunk Voice/WAN Interface Card Expansion module 2 ports
Cisco Expansion ModulesVWIC3-2MFT-G703 Cisco Trunk Voice/WAN Interface Card Expansion module 2 ports
VWIC3-2MFT-G703 Overview
Cisco Third-Generation 2-Port G.703 Multiflex Trunk Voice/WAN Interface Card Expansion module 2 ports. This Cisco 2-port G.703 MFT VWIC3 versions act as a WIC, supporting T1, fractional T1, E1, fractional E1, and unstructured E1 (G.703) applications. To simplify remote management, the G.703 version includes a fully managed DSU. The G.703 versions also support all the capabilities on the T1/E1 versions.
SKU: VWIC3-2MFT-G703 -
Juniper Expansion Modules
PE-1OC12-SON-SFP Juniper Networks Physical Interface Card Expansion module
PE-1OC12-SON-SFP Overview
Juniper Networks Physical Interface Card Expansion module. This Juniper 1-Port OC12/STM4 OR OC3/STM1 Rate-Selectable PIC is a network interface card designed for use with Juniper Networks routers. It provides high-speed connectivity for network applications that require large amounts of bandwidth. It supports both OC-12/STM-4 and OC-3/STM-1 interfaces, making it a versatile option for network administrators. It also provides rate-selectable options, allowing users to adjust the bandwidth as needed.
SKU: PE-1OC12-SON-SFP -
-
-
-
