SM-X-NIM-ADPTR Cisco Network Interface One Nim Module
SM-X-NIM-ADPTR Overview
Cisco Network Interface Sm-x Adaptor For One Nim Module The SM-X-NIM-ADPTR acts as a carrier card for the Cisco 4000 Series ISRs to carry one network interface module (NIM) to be used in the ISRs SM slot.
$665
SM-X-NIM-ADPTR Technical Specifications
Cisco Network Interface Sm-x Adaptor For One Nim Module
Manufacturer : CISCO DS HARDWARE DIRECT
Brand : Cisco
Product Line : Cisco Network Interface Module
Line Properties
Line Rate : T-1/E-1
Networking
Type : Network adapter
Form Factor : Plug-in module
Connectivity Technology : Wired
Status Indicators
Status
Interface Provided
Interfaces : 1 x T1/E1
Compatibility
Compatible With : Cisco Integrated Services Router 4321, 4331, 4351, 4431
Related products
-
Cisco Modules
CWDM-MUX8A Cisco 8-channels CWDM MUX/DEMUX Module
CWDM-MUX8A Overview
The 8-Channel Multiplexer/Demultiplexer (CWDM-MUX-8A) allows you to multiplex/demultiplex eight separate channels into one pair of fiber. Dual fiber is used for both the network connection and the CWDM GBIC or CWDM SFP transceiver connections. The eight available wavelengths are 1470-nm, 1490-nm, 1510-nm, 1530-nm, 1550-nm, 1570-nm, 1590-nm, and 1610-nm. The multiplexer/demultiplexer, is equipped with a monitor port that allows you to attach a power meter or an optical spectrum analyzer to assist you in monitoring and troubleshooting the network
SKU: cwdm-mux8a -
Cisco Modules
NME-16ES-1G-P, Cisco EtherSwitch Service Module Managed L3 Switch
NME-16ES-1G-P Overview
The Cisco EtherSwitch service modules provide Cisco modular access routers the ability to stack Cisco EtherSwitch service modules as Layer 2 switches using Cisco StackWise technology. The Cisco EtherSwitch service modules are supported by either the IP base image (formerly known as standard multilayer image (SMI)) or the IP services image (formerly known as the enhanced multilayer image (EMI)).
SKU: NME-16ES-1G-P -
Cisco Modules
CWDM-OADM4-1, Cisco 4-channels CWDM OADM Module
CWDM-OADM4-1 Overview
The 4-Channel OADM allows you to add/drop four channels (with different wavelengths) into one direction of an optical ring. The 4-channel OADMs are transparent to the 1300-nm wavelength and includes a 1300-nm/1500-nm filter to mix legacy SONET/SDH/ATM ring installations with CWDM installations on the same optical fiber.
SKU: CWDM-OADM4-1
