SMF Connectivity
Showing 401–425 of 680 resultsSorted by popularity
-
-
-
-
HPE Transceivers
J9153D HP ProCurve 10Gbps Single-Mode Fiber 40km SFP+ Module
J9153D Overview
This HP® compatible SFP+ transceiver provides 10GBase-ER throughput up to 40km over single-mode fiber (SMF) using a wavelength of 1550nm via an LC connector. It is guaranteed to be 100% compatible with the equivalent HP® transceiver. This easy to install, hot swappable transceiver has been programmed, uniquely serialized and data-traffic and application tested to ensure that it will initialize and perform identically. Digital optical monitoring (DOM) support is also present to allow access to real-time operating parameters. This transceiver is Trade Agreements Act (TAA) compliant. We stand behind the quality of our products and proudly offer a limited lifetime warranty.
SKU: J9153D -
HPE Transceivers
J9153A HP ProCurve X132 10Gbps 10GBase-ER SFP+ Module
J9153A Overview
This HP® compatible SFP+ transceiver provides 10GBase-ER throughput up to 40km over single-mode fiber (SMF) using a wavelength of 1550nm via an LC connector. It is guaranteed to be 100% compatible with the equivalent HP® transceiver. This easy to install, hot swappable transceiver has been programmed, uniquely serialized and data-traffic and application tested to ensure that it will initialize and perform identically. Digital optical monitoring (DOM) support is also present to allow access to real-time operating parameters. This transceiver is Trade Agreements Act (TAA) compliant. We stand behind the quality of our products and proudly offer a limited lifetime warranty.
SKU: J9153A -
-
-
-
-
-
HPE Transceivers
J4860A HP ProCurve 1Gbps 1000Base-LH Single-mode Fiber SFP Module
J4860A Overview
HP Compatible 1000BASE-ZX SFP Transceiver Module (SMF, 1550nm, 70km, LC, DDM)
This HP compatible transceiver provides a great replacement for original HP ProCurve Gigabit-LH-LC Mini-GBIC. It is designed for 1000BASE-ZX Gigabit Ethernet and 1G Fibre Channel application. It fully complies with the Multi-Sourcing Agreement (MSA) and can be used on the MSA compliant networking equipment.
SKU: J4860A -
-
Cisco Transceivers
ONS-SC+-10GEP44.5 Cisco Systems 10G MR, Edge Performance SF FD
ONS-SC+-10GEP44.5 Overview
Cisco offers a comprehensive range of pluggable optical modules for the Cisco ONS family of multiservice platforms. The wide variety of modules gives you flexible and cost-effective options for all types of client interfaces. Cisco offers a range of GBICs for Gigabit Ethernet use, a wide variety of SFP modules, XFP modules and has recently introduced SFP+, CXP and CFP pluggable modules. These small, modular optical interface transceivers offer a convenient and cost-effective solution for an array of applications in the data center, campus, metropolitan-area access and ring network, storage area network, and long-haul network.
SKU: ONS-SC+-10GEP44.5 -
Cisco Transceivers
ONS-XC-10G-EP48.5 Cisco Edge Performance XFP Transceiver Module
ONS-XC-10G-EP48.5 Overview
The XFP transceiver module is a bidirectional device with a transmitter and receiver in the same physical package. The XFP module contains a 30-pin surface mount connector on the electrical interface and a duplex LC connector on the optical interface.
SKU: ONS-XC-10G-EP48.5 -
Cisco Transceivers
ONS-SC-2G-30.3 Cisco Systems SFP – OC-48/STM16, 1530.33N
ONS-SC-2G-30.3 Overview
The Cisco ONS 2.5-Gbps fixed-rate OC-48/STM-16 DWDM optics provide both transmit and receive optical interfaces in a single SFP footprint pluggable into any of the four ASAP 4-PIO slots. Each port interface operates at the standard SONET/SDH (Telcordia GR-253-CORE, ITU G.703 and ITU-T G.694.1) 2488.32-Mbps bit rate. The Cisco ONS 2.5-Gbps fixed-rate OC-48/STM-16 DWDM SFP uses a duplex LC connector on the SFP faceplate that is routed through a fiber tray on to the cable-routing module for termination. The Cisco ONS 2.5-Gbps fixed-rate DWDM SFP carries both concatenated payloads of STS-3c/VC-4, STS-6c/VC-4-2c, STS-9c/VC-4-3c, STS-12c/VC-4-4c, STS-24c/VC-4-8c, and STS-48c/VC-4-16c and nonconcatenated payloads on an STS-1 basis. In SONET mode, each optical port can be provisioned as STM-16 to enable the tunneling of SDH payloads in the form of STS-Nc concatenated payload over a SONET network. This helps enable North American service providers to transport SDH traffic from international cable landing points to customer sites. When operated within the outlined specifications (refer to Table 5), each port interface transports a 2.5-Gbps signal with a minimum BER of 10E-12. The Cisco ONS 2.5-Gbps fixed-rate OC-48/STM-16 DWDM SFP provides 32 wavelengths in the ITU-T G.694.1 C-Band channel plan.
SKU: ONS-SC-2G-30.3 -
Cisco Transceivers
CWDM-SFP10G-1610 SFP Transceiver Module 10 Gig
CWDM-SFP10G-1610 Overview
CWDM SFP+ Transceiver Modules are 100% all OEM applications. They are pre-configured with an application specific code to meet the requirement set forth by the router and switch OEMs. Transceivers perform, fit and function identically when compared to “Original” Transceivers. Transceivers also function with other brands within the same network.SKU: CWDM-SFP10G-1610 -
Cisco Modules
CWDM-OADM1-1510 Cisco 1510NM Dual Single Channel OADM Module
CWDM-OADM1-1510 Overview
This CWDM OADM is passive device that can multiplex/demultiplex or add/drop wavelengths from multiple fibers onto one optical fiber. The
OADM connectors are interfaced to the color-matching CWDM GBIC or CWDM SFP transceivers on the equipment side. Single-wavelength OADM
are equipped with two channels traveling different network paths (east and west) to offer redundancy or protection in rings.SKU: CWDM-OADM1-1510 -
Cisco Modules
CWDM-OADM1-1550 Cisco 1550NM Dual Single Channel OADM Module
CWDM-OADM1-1550 Overview
This CWDM OADM is passive device that can multiplex/demultiplex or add/drop wavelengths from multiple fibers onto one optical fiber. The OADM connectors are interfaced to the color-matching CWDM GBIC or CWDM SFP transceivers on the equipment side. Single-wavelength OADM are equipped with two channels traveling different network paths (east and west) to offer redundancy or protection in rings.
SKU: CWDM-OADM1-1550 -
Cisco Modules
CWDM-OADM1-1570 Cisco 1570NM Dual Single Channel OADM Module
CWDM-OADM1-1570 Overview
This CWDM OADM is passive device that can multiplex/demultiplex or add/drop wavelengths from multiple fibers onto one optical fiber. The OADM connectors are interfaced to the color matching CWDM GBIC or CWDM SFP transceivers on the equipment side. Single-wavelength OADM are equipped with two channels traveling different network paths (east and west) to offer redundancy or protection in rings.
SKU: CWDM-OADM1-1570
