SMF Connectivity
Showing 426–450 of 680 resultsSorted by popularity
-
Cisco Transceivers
ONS-SC-2G-40.5 Cisco Systems SFP OC-48/STM16, 1540.56N FD
ONS-SC-2G-40.5 Overview
The Cisco ONS 2.5-Gbps fixed-rate OC-48/STM-16 DWDM optics provide both transmit and receive optical interfaces in a single SFP footprint pluggable into any of the four ASAP 4-PIO slots. Each port interface operates at the standard SONET/SDH (Telcordia GR-253-CORE, ITU G.703 and ITU-T G.694.1) 2488.32-Mbps bit rate. The Cisco ONS 2.5-Gbps fixed-rate OC-48/STM-16 DWDM SFP uses a duplex LC connector on the SFP faceplate that is routed through a fiber tray on to the cable-routing module for termination. The Cisco ONS 2.5-Gbps fixed-rate DWDM SFP carries both concatenated payloads of STS-3c/VC-4, STS-6c/VC-4-2c, STS-9c/VC-4-3c, STS-12c/VC-4-4c, STS-24c/VC-4-8c, and STS-48c/VC-4-16c and nonconcatenated payloads on an STS-1 basis. In SONET mode, each optical port can be provisioned as STM-16 to enable the tunneling of SDH payloads in the form of STS-Nc concatenated payload over a SONET network. This helps enable North American service providers to transport SDH traffic from international cable landing points to customer sites. When operated within the outlined specifications (refer to Table 5), each port interface transports a 2.5-Gbps signal with a minimum BER of 10E-12. The Cisco ONS 2.5-Gbps fixed-rate OC-48/STM-16 DWDM SFP provides 32 wavelengths in the ITU-T G.694.1 C-Band channel plan.
SKU: ONS-SC-2G-40.5 -
-
Cisco Transceivers
ONS-SC-2G-31.9 Cisco Systems SFP OC-48/STM16, 1531.90N
ONS-SC-2G-31.9 Overview
The Cisco ONS 2.5-Gbps fixed-rate OC-48/STM-16 DWDM optics provide both transmit and receive optical interfaces in a single SFP footprint pluggable into any of the four ASAP 4-PIO slots. Each port interface operates at the standard SONET/SDH (Telcordia GR-253-CORE, ITU G.703 and ITU-T G.694.1) 2488.32-Mbps bit rate. The Cisco ONS 2.5-Gbps fixed-rate OC-48/STM-16 DWDM SFP uses a duplex LC connector on the SFP faceplate that is routed through a fiber tray on to the cable-routing module for termination. The Cisco ONS 2.5-Gbps fixed-rate DWDM SFP carries both concatenated payloads of STS-3c/VC-4, STS-6c/VC-4-2c, STS-9c/VC-4-3c, STS-12c/VC-4-4c, STS-24c/VC-4-8c, and STS-48c/VC-4-16c and nonconcatenated payloads on an STS-1 basis. In SONET mode, each optical port can be provisioned as STM-16 to enable the tunneling of SDH payloads in the form of STS-Nc concatenated payload over a SONET network. This helps enable North American service providers to transport SDH traffic from international cable landing points to customer sites. When operated within the outlined specifications (refer to Table 5), each port interface transports a 2.5-Gbps signal with a minimum BER of 10E-12. The Cisco ONS 2.5-Gbps fixed-rate OC-48/STM-16 DWDM SFP provides 32 wavelengths in the ITU-T G.694.1 C-Band channel plan.
SKU: ONS-SC-2G-31.9 -
Cisco Transceivers
ONS-SC+-10GEP48.5 Cisco Edge Performance – LC SFP+ Transceiver
ONS-SC+-10GEP48.5 Overview
Cisco offers a comprehensive range of pluggable optical modules for the Cisco ONS family of multiservice platforms. The wide variety of modules gives you flexible and cost-effective options for all types of client interfaces. Cisco offers a range of GBICs for Gigabit Ethernet use, a wide variety of SFP modules, XFP modules and has recently introduced SFP+, CXP and CFP pluggable modules. These small, modular optical interface transceivers offer a convenient and cost-effective solution for an array of applications in the data center, campus, metropolitan-area access and ring network, storage area network, and long-haul network.
SKU: ONS-SC+-10GEP48.5 -
Cisco Transceivers
DWDM-SFP10G-57.36 Cisco Systems 10GBASE-DWDM
DWDM-SFP10G-57.36 Overview
Main features of the Cisco DWDM Small Form-Factor Pluggable Plus (SFP+) module include:
The Cisco DWDM SFP+ supports 10-Gigabit data rates from 9.9G to 11.1G (LAN, WAN, and OTU2/OTU2e).
The hot-swappable input/output device plugs into an Ethernet SFP+ port of a Cisco switch or router to link the port with the network.
The Cisco DWDM SFP+ supports the Cisco quality identification (ID) feature, which enables a Cisco switch or router to identify whether or not the module is an SFP+ module certified and tested by Cisco.
The standard Cisco DWDM SFP+ supports 40 non-tunable ITU 100-GHz wavelengths.
Cisco DWDM SFP+ modules support digital optical monitoring capability.SKU: DWDM-SFP10G-57.36 -
-
HPE Transceivers
455886-B21 HP Bladesystem C-Class 10GB Long Range Transceiver
455886-B21 Overview
HPE BladeSystem c-Class Compatible 10GBASE-LR SFP+ Transceiver Module (SMF, 1310nm, 10km, LC, DOM)
HPE BladeSystem c-Class compatible SFP+ transceiver supports up to 10km link lengths over LC duplex SMF fiber. This transceiver is compliant with SFF-8431, SFF-8432 and IEEE 802.3ae standards. Digital diagnostics monitoring is available via a 2-wire serial interface, as specified in SFF-8472. Featuring low power consumption, high speed, this 10G SFP+ transceiver is ideal for data center, enterprise wiring closet, service provider transport application, Radio & Baseband Unit, etc.
SKU: 455886-B21 -
-
-
-
-
-
Cisco Transceivers
SFP-OC12-LR2 Cisco OC-12/STM-4 Long Reach 80km Transceiver
SFP-OC12-LR2 Overview
Cisco OC-12/STM-4 Pluggable long-reach (80 km) transceiver module, 1550-nm wavelength, LC connector. Cisco SFP-OC12-LR2 This Single-mode long range (LR-1)module used with the OC-12 ATM Line Card with Distance range 1550nm. Cabling distance miles (80 km), Connectors Multimode fiber-optic: LC-type connector Single-mode fiber-optic: LC-type connector.
SKU: SFP-OC12-LR2 -
-
Cisco Transceivers
WSP-Q40GLR4L Cisco 40G Fabric Extender Transceiver QSFP+ Module
WSP-Q40GLR4L Overview
Cisco 40GBASE-LR4L QSFP+ Optical Transceiver Module (SMF, 1310nm, 2km, LC, DOM)
The QSFP+ module is designed for use in 40GBASE Ethernet throughput up to 2km over single mode fiber (SMF) using a wavelength of 1310nm via duplex LC connectors. This transceiver is compliant with QSFP+ MSA and IEEE 802.3ba 40GBASE-LR4 standard. Digital diagnostics functions are also available via the I2C interface, as specified by the QSFP+ MSA, to allow access to real-time operating parameters.
SKU: WSP-Q40GLR4L -
Cisco Transceivers
X2-10GB-ER Cisco X2 – SC Single-Mode X2 Transceiver 10 GBPS
X2-10GB-ER Overview
This Cisco® X2 transceiver provides 10GBase-ER throughput up to 40km over single-mode fiber (SMF) using a wavelength of 1550nm via a SC connector. It is guaranteed to be 100% compatible with the equivalent Cisco® transceiver. This easy to install, hot swappable transceiver has been programmed, uniquely serialized and data-traffic and application tested to ensure that it will initialize and perform identically. Digital optical monitoring (DOM) support is also present to allow access to real-time operating parameters. This transceiver is Trade Agreements Act (TAA) compliant. We stand behind the quality of our products and proudly offer a limited lifetime warranty.
SKU: X2-10GB-ER
